Hi,
I know that the FrSky FW version doesn't include the templates section.
Thing is I'm trying to have something like the servo test in order to test some radio TX/RX systems.
I could backup everything, load the FW with templates and run the servo test but I'd prefer to leave that to very last option.
So my question is, is there any way to have at least one or more channels moving continuously while using the FrSky FW version?
Did anyone tried this before, like some weird combination of customs switches?
Thanks.
Servo test on FrSKY FW version.
Servo test on FrSKY FW version.
Last edited by IceWind on Mon Jan 07, 2013 11:43 pm, edited 1 time in total.
Re: Servo test on FrSKY FW version.
You could read your eeprom into eePe, apply the servo test template to a free model memory, then write the eeprom back.
You don't need to have the templates in the firmware to use them. You apply them to a free model memory, then that model memory will have a "copy" of the template.
You don't need to have the templates in the firmware to use them. You apply them to a free model memory, then that model memory will have a "copy" of the template.
Re: Servo test on FrSKY FW version.
Excellent! I wasn't aware that was possible.
Thank you!
Thank you!