Hi,
I just flashed the new 777 Jeti FW and I get only "JETI" on the upper left side, what is the issue ?
Regards
MP
JETI 777
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: JETI 777
I don't know. I don't have a JETI setup to test it with. Is it just a telemetry display problem, or does the Tx not work or let you get to menus?
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: JETI 777
This is a FW problem: at the very first Jeti FW- I can't remember which FW- the screen displayed a menu which allowed to go to the datas, nevermind the Rx is or not working and the sensors linked.
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: JETI 777
I just had a look at the code, which I believe has not changed for some time.
When on the "JETI" screen, UP, DOWN, LEFT and RIGHT keystrokes are NOT processed by er9x, instead they are transmitted to the JETI telemetry. The screen just displays data as received from the JETI telemetry.
It looks to me as though the Rx needs to be functioning to get anything on that screen.
Mike.
When on the "JETI" screen, UP, DOWN, LEFT and RIGHT keystrokes are NOT processed by er9x, instead they are transmitted to the JETI telemetry. The screen just displays data as received from the JETI telemetry.
It looks to me as though the Rx needs to be functioning to get anything on that screen.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: JETI 777
just tested Revision up to r777, they work.
Is your data connection to the jeti rf module ok.
I get this blank screen (only "JETI") when I cut the data line connection (for flashing as example).
regards
manu
Is your data connection to the jeti rf module ok.
I get this blank screen (only "JETI") when I cut the data line connection (for flashing as example).
regards
manu