False switch warning

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
Post Reply
sporez
Posts: 62
Joined: Wed Dec 28, 2011 1:36 pm
Country: -
Location: New York, USA

False switch warning

Post by sporez »

Every once in a while I'll turn on my TX and get the "switch is not off" warning but the thing is all the switches are in the UP position. After I get that random error I'll look at the display and verify that none of the switches are highlighted as being activated. Does anyone else have this? is it a bug in the software or a hardware issue?
Top
User avatar
cre8tiveleo
Posts: 1434
Joined: Tue Dec 27, 2011 6:13 pm
Country: -
Location: Ontario,(GTA North)
Contact:
Contact cre8tiveleo

Re: False switch warning

Post by cre8tiveleo »

Might be a cold solder on one of the switch leads... or a bad switch...

I haven't had this happen .. yet.

:)
Top
User avatar
agusta600gt
Posts: 106
Joined: Mon Jan 09, 2012 5:45 pm
Country: -
Location: Hebertville,Quebec,Canada

Re: False switch warning

Post by agusta600gt »

i too,getting two switch alarms on newly flased er9x/frsky R677...THR and AIL switch alarms.

on the er9x only i didnt got those alarms...

thanks
Top
User avatar
erazz
9x Developer
Posts: 682
Joined: Tue Dec 27, 2011 6:25 pm
Country: -
Location: NJ-USA
Contact:
Contact erazz

Re: False switch warning

Post by erazz »

Yes, for the FrSky version you need to do the hardware modifications.
Z

BEWARE - WE ARE IN THE AIR!!!
What goes up... Should be controlled by a 9X!
Top
Post Reply

Return to “er9x”