er9x setup for Blade Nano S3

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
Post Reply
Robster94gt
Posts: 1
Joined: Thu Oct 13, 2022 12:18 am
Country: -

er9x setup for Blade Nano S3

Post by Robster94gt »

Hey all,
I've got a Blade Nano S3 heli, and a Turnigy 9x running er9x. I have no idea how to set it up using the settings suggested in the Nano S3 manual.

Can someone help me out with how to take these settings and enter them into er9x?

Thanks!
Rob
Attachments
16656206686546749455310826624314.jpg
(3.75 MiB) Not downloaded yet

User avatar
bob195558
Posts: 2377
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: er9x setup for Blade Nano S3

Post by bob195558 »

This maybe a help: viewtopic.php?f=5&t=6473
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Post Reply

Return to “er9x”