FRSKY R9M 2019 with ACCST firmware and R9MM with ACCST firmware in 9x
FRSKY R9M 2019 with ACCST firmware and R9MM with ACCST firmware in 9x
So I got R9M module with R9MX rx. Soon found that the new 2019 version has ACCESS protocol. After flashing it to ACCST firmware, it was going into bind mode. But R9MX doesn’t support ACCST. So I am planning to get R9MM rx which supports ACCST. My question is that will it work with 9x? I am also planning to flash my tx. So how will I be able to configure the module once I flash it. Will it be possible to use the module with stock software on tx( I don’t need telemetry)
Re: FRSKY R9M 2019 with ACCST firmware and R9MM with ACCST firmware in 9x
Try this elrs firmware for your r9 hardware. Its a serious update....
https://github.com/ExpressLRS/ExpressLRS/wiki
https://github.com/ExpressLRS/ExpressLRS/wiki