Thanks in advance for any help, getting back into drones after a few years and forgot some things.
Using Flysky TH9X flashed with ER9X -r812 v1.142- Mike. Problem is I am only getting the upper half of the throttle range, mid throttle to high, no 0 to mid throttle, with transmitter on display screen, throttle stick at bottom the display is showing throttle at mid range point, only throttle movement is mid to full range nothing on the minus side of range? When I try to calibrate sticks the throttle pointer (with stick at bottom) is in the middle of the center box, will not drop to the bottom of box? this transmitter is doing this same senaro on every one of the 5 models so something changed or I changed them by accident? My mixer setting for ch 3 is 100 THR?
I am not able to figure it out so any help is appreciated.
Throttle range no 0 to mid range only mid to 100%
Re: Throttle range no 0 to mid range only mid to 100%
You did not center the throttle stick when asked during calibration.
Re: Throttle range no 0 to mid range only mid to 100%
Correct Thanks again