Hi,
I have er9x-pr820 frsky 128 V1.647
When I get 3D fix I see Galt at the screen become 29.0, then I press Zero Alt from pop up menu but Galt keeps the same value as before.
How can this be fixed?
Zero Alt doesn't work
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Zero Alt doesn't work
At present, assuming you wish to use the GPS alt. rather than the barometric alt., go to the telemetry menu and set GpsAltMain to on (ticked). This uses the GPS alt. value as the Alt value. The "Zero Alt" option should then zero the displayed Alt value.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Zero Alt doesn't work
Hi Mike! Yes, it was always ticked. Can be some other reason?
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Zero Alt doesn't work
The Galt value won't appear as zero, but the "ordinary" Alt value should.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Zero Alt doesn't work
When I changed GAlt to Alt at the telemetry screen it show 0 from the beginning. GpsAltMain ticked. Is that correct behavior? I can't fly the drone right now to check alt change.
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Zero Alt doesn't work
It sounds correct. The code "auto-zeroes" when it first receives an Alt value.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Zero Alt doesn't work
Thank you Mike as always. Sorry for wasting your time, but I couldn't figure it all out from the manual, and it was so simple. I wish the manual would be more detailed, but it requires some more community efforts to do that.