New releases
Re: New releases
Ah, ersky board. Don't know how ppmca is handled there then. On the stock board it's a compile option.
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Re: New releases
Holy Hanna of options!
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: New releases
Would you like me to compile you a version with the option?
The open9x sky9x board is not fully in sync option/compile wise within companion
Rob
The open9x sky9x board is not fully in sync option/compile wise within companion
Rob
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
-
- 9x Developer
- Posts: 1109
- Joined: Sat Dec 31, 2011 12:11 am
- Country: -
- Location: Massa (MS), Tuscany, Italy
Re: New releases
PPM Center Adjustable is not an option enabled by default on ersky9x board and also cannot be enabled as not sufficiently tested on that board...
So Leo if your PPM center was varying don't look and do not discredit things are not there....
So Leo if your PPM center was varying don't look and do not discredit things are not there....
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Re: New releases
Romolo wrote: So Leo if your PPM center was varying don't look and do not discredit things are not there....
Let me get my radio back to working condition, and I will check everything. I did not notice any variation with er9x for erskyboard (only that I couldn't get it to 1500, just 1501 or 1498), it did vary with open 9x, then my radio died. So at the moment I cannot credit or discredit anything.
Re: New releases
Rereading the posts, leo never talked about ppmca. Replies did, because as he was talking of servos centers off and the relation with the feature was probably made a bit too quickly.
So what he had is controls that moved around weirdly, we don't know much more as to how/why at this point...cre8tiveleo wrote: My Quad bit the biscuit with a rev of open9x, the servo centres were way off, and I didn't notice it till it was like, c**p there she flips over.. flop...(before all the centres were @1500, at the flip, they were going all over the place, 1200>1600>1400>1300 and everywhere in between, even the switches were jumping, elevator switch 900>980>875 constantly)
Re: New releases
How did it die? Could that be related?cre8tiveleo wrote:then my radio died.
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Re: New releases
Nothing to do with it. It was a unfortunate accidental removal of a voltage regulator. Along with some pcb board traces... yeah.. when I mess up a board, I do it better than anyone.
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: New releases
We may have to call him notsoluckyleo now?
SM
SM
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Re: New releases
It was a very creative accidental removal...
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: New releases
The ppmca is not available today in open9x / ersky9x board. It will be as soon as somebody will need it and will be ready to test it
Bertrand.
Bertrand.
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
New releases
Well, seeing that my servo centres were way off, my radio will be woeking after tomorrow.
For any of my flight controllers to work, center on all inputs must be 1500, or close. (not what they were)
Once i'm back in business with my ersky board, i'll be the guine pig.
---
I am here: http://tapatalk.com/map.php?1of4ao
For any of my flight controllers to work, center on all inputs must be 1500, or close. (not what they were)
Once i'm back in business with my ersky board, i'll be the guine pig.
---
I am here: http://tapatalk.com/map.php?1of4ao
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: New releases
I just did a quick test for the hell of it - arm board.bertrand35 wrote:The ppmca is not available today in open9x / ersky9x board. It will be as soon as somebody will need it and will be ready to test it
Bertrand.
I see that what happened is the 'INVERT' option disappeared on the LIMITS page - and is replaced with a numeric number. Tried adjusted it - but cant say it made any difference
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: New releases
Rob, you have added it in the Menus, that's right, but it's not used at all in the pulses_arm.cpp which is specific code for the ARM!
Does somebody need it right now?
Bertrand.
Does somebody need it right now?
Bertrand.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
New releases
Not me... I just looked out of interest
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!