OpenTX - Nightly builds for pre-2.0 testing

openTx has introduced a range of new features, ideas and bling. It is fast becoming the firmware of choice for many users. openTx will run on ALL current hardware platforms, including the gruvin9x and sky9x boards. Work has already started to support the new FrSky X9D radio!
User avatar
Kilrah
Posts: 10795
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by Kilrah » Thu May 22, 2014 9:31 pm

make PCB=TARANIS TRANSLATIONS=FR HELI=NO.

The others are now defined by default in the makefile (see around line 640 for next).


bertrand35
9x Developer
Posts: 2764
Joined: Fri Dec 30, 2011 11:11 pm
Country: -

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by bertrand35 » Thu May 22, 2014 9:33 pm

Pourquoi "in companion" ?

davx
Posts: 210
Joined: Sun Sep 15, 2013 7:01 am
Country: -

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by davx » Thu May 22, 2014 10:17 pm

Kilrah wrote:make PCB=TARANIS TRANSLATIONS=FR HELI=NO.

The others are now defined by default in the makefile (see around line 640 for next).
Ok, thanks.

bertrand35 wrote:Pourquoi "in companion" ?
Just so I can compare the size of the firmware that I compile with the one downloaded, and with the same build options.

download/file.php?mode=view&id=8021

Tchao
Attachments
Build_Options.jpg

User avatar
mizuta1951
Posts: 17
Joined: Tue Jun 25, 2013 2:24 am
Country: Japan

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by mizuta1951 » Fri May 23, 2014 12:52 am

Can't find Nightly-Builds after 20-May.
Some thing wrong on my PC?

User avatar
azure93
Posts: 9
Joined: Mon May 19, 2014 4:43 am
Country: Korea, Republic of
Location: Jeonju

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by azure93 » Fri May 23, 2014 1:20 am

mizuta1951 wrote:Can't find Nightly-Builds after 20-May.
Some thing wrong on my PC?
Downlaod companion in below link & download firmware through companion.

New Companion is here: http://downloads-20.open-tx.org/companion/
Free! For Endless World.


User avatar
mizuta1951
Posts: 17
Joined: Tue Jun 25, 2013 2:24 am
Country: Japan

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by mizuta1951 » Fri May 23, 2014 2:16 am

Great !

User avatar
HC1969
Posts: 421
Joined: Wed Dec 28, 2011 8:47 am
Country: Hungary
Location: Istvan Magi
Contact:

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by HC1969 » Fri May 23, 2014 5:04 am

Others have indicated to me that noticed the special menu funcion the voice file names only 8 characters handles in FW .
Over eight character file name can not play it.
http://rc.emiter.hu/ (MegaSound 9X, GCL-2, FrSky-RSSI-DAC, etc.) Keress fel!

User avatar
Kilrah
Posts: 10795
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by Kilrah » Fri May 23, 2014 8:12 am

Yes it is one of the changes.

User avatar
azure93
Posts: 9
Joined: Mon May 19, 2014 4:43 am
Country: Korea, Republic of
Location: Jeonju

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by azure93 » Fri May 23, 2014 9:02 am

bertrand35 wrote:I just added the haptic option for Taranis to the compilation server, would you check for me that it works? Thanks!
Thanks! It works. But I can't find lua model script page in firmware.
Free! For Endless World.

Diablol
Posts: 39
Joined: Fri May 23, 2014 4:11 pm
Country: -

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by Diablol » Fri May 23, 2014 4:13 pm

^^me too. It was there in the last nightly but gone in official 1.99.1

davx
Posts: 210
Joined: Sun Sep 15, 2013 7:01 am
Country: -

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by davx » Fri May 23, 2014 4:24 pm

Hi,
Kilrah wrote:make PCB=TARANIS TRANSLATIONS=FR HELI=NO.

The others are now defined by default in the makefile (see around line 640 for next).
I've found that the equivalent options for fr, noheli and notemplates in Companion was make PCB=TARANIS GVARS=YES TRANSLATIONS=FR and my last build with these parameters weighted 252020 bytes (23.05.2014 17H54).

Could you tell me what you get with the last commits ?

User avatar
guttedgeek
Posts: 7
Joined: Wed Feb 19, 2014 10:52 pm
Country: -

Haptic doesn't honor repeat in special functions

Post by guttedgeek » Fri May 23, 2014 11:06 pm

*** Ignore this post. All works fine when programmed on the radio. It's when setup using companion that the the repeat interval doesn't get set right.


Noticed an issue with Haptic & Special Functions. Running 1.99.1 (21-05-2014).

When setting a repeat interval on Haptic (eg 5s), it only "plays" once (ie, it doesn't repeat).

Also curious to understand what the different numbers after "Haptic" in SFs do? I assumed a different vibration pattern but they all feel the same.

Hawk600
Posts: 22
Joined: Tue Jan 07, 2014 4:58 am
Country: -

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by Hawk600 » Sat May 24, 2014 5:38 am

azure93 wrote:
mizuta1951 wrote:Can't find Nightly-Builds after 20-May.
Some thing wrong on my PC?
Download companion in below link & download firmware through companion.
New Companion is here: http://downloads-20.open-tx.org/companion/
This is not working for me for some reason..I have Companion 1.99.1 installed and when I use it to download a firmware it brings me opentx-taranis-en.bin and after flashing it to the radio I have on the radio screen: Firmware 1.99.1 BUT no Haptic feedback option in the radio General settings neither it works.

IF I manually flash the radio with the latest Nightly available which is 5.20.14, than the radio screen shows Firmware 1.99 (note the missing .1) BUT the Haptic option is present in General Options and haptic works! :o

User avatar
Kilrah
Posts: 10795
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by Kilrah » Sat May 24, 2014 6:21 am

You need to tick the "haptic" box in the firmware options in companion before downloading, you'll then get opentx-taranis-haptic-en.bin and have the functionality. It is not included by default as it only makes sense if you installed the haptic module.

Hawk600
Posts: 22
Joined: Tue Jan 07, 2014 4:58 am
Country: -

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by Hawk600 » Sat May 24, 2014 1:24 pm

Thank you Kilrah, it makes sense :)
I was totally absorbed with the haptic idea that I was thinking it as default and not the opposite, I forgot not everyone would be going for it.
You guys are doing an outstanding work, thank you again!

User avatar
ckleanth
Posts: 81
Joined: Sun Dec 23, 2012 11:19 pm
Country: United Kingdom
Contact:

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by ckleanth » Sat May 24, 2014 3:03 pm

Guys I have an issue with telemetry and measured values using taranis 2940 & d8r-xp & sensor hub & gps & triaxis acceleration sensors.
Files here
http://www.rcgroups.com/forums/showpost ... count=3426
I think its a problem with opentx if not can someone enlighten me?
Thanks
If it has wings it will fly...

janlebelg
Posts: 12
Joined: Sat May 17, 2014 4:33 pm
Country: -

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by janlebelg » Sat May 24, 2014 6:21 pm

hi
i ve got vertion 1.99.1
FR 23/5 and haptic
the problem is that all the switches are not good
when al buton are up my taranis shows that the switches are in the midel
even in a new model

rdeanchurch
Posts: 706
Joined: Tue Dec 27, 2011 11:22 pm
Country: United States
Location: Carson City, Nv

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by rdeanchurch » Sat May 24, 2014 6:45 pm

Not a clear message to me.
It seems to work fine for me in Companion simulators and on the transmitter(tx).
Clarify where you are operating. Companion model simulator, Companion tx simulator or on tx
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1

janlebelg
Posts: 12
Joined: Sat May 17, 2014 4:33 pm
Country: -

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by janlebelg » Sat May 24, 2014 7:02 pm

when i thurn on my taranis al swithes were up and on the screen my taranis shows al in the midel
when i put them in the midel it shows up
and wen it is dawn it is dawn
switsh
sa up =>screen SA-
SA midel=> screen SA dawn
SA low=>screen SB up
....
Sh up=>screen SH dawn
sh dawn=> S11
i hope this helps

rdeanchurch
Posts: 706
Joined: Tue Dec 27, 2011 11:22 pm
Country: United States
Location: Carson City, Nv

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by rdeanchurch » Sat May 24, 2014 7:12 pm

Sorry, I can not duplicate on Taranis
Vers : 1.99.1
Date : 2014 -05-24
Time : 02:01:40
EEPR: 216
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1

janlebelg
Posts: 12
Joined: Sat May 17, 2014 4:33 pm
Country: -

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by janlebelg » Sat May 24, 2014 7:23 pm

strang i have the latesd up date myn is
vers1.99.1
date 2014-05-23
time 13.30.06
eepr216

i gona put the en vertion
dit it
it is the vertion FRENCH vertion that has a problem
whit or whitout haptic
the en vertion is ok

mmielke
Posts: 1
Joined: Mon May 26, 2014 9:48 am
Country: -

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by mmielke » Mon May 26, 2014 9:51 am

also wrong display of switch status in german firmware - vers.1.99.1

User avatar
dinamich
Posts: 288
Joined: Mon Apr 01, 2013 1:21 pm
Country: Slovenia
Location: Ljubljana

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by dinamich » Mon May 26, 2014 1:06 pm

Endolf wrote:Hi

Just upgraded from the 5th of may build to the 20th of may build. I have a logical switch set up that is based off throttle being >-99 and my throttle hold switch not being in 'hold' position. I then have an edge switch based on this value becoming false that has a duration of 20 seconds. The idea was that I could carry on recording logs for 20 seconds after hitting throttle hold (think auto rotation on helis).

After I upgraded all my 'cell' logical switches became 'fuel' as did all my telemetry read outs. This was sort of expected as per the warning about the builds newer than 20th. However, what I can't seem to resolve is my edge switch with a duration. It just triggers and flicks off again, it not longer has the duration.

Is this a bug or has the functionality been moved to somewhere new?

Thanks

Endolf
The 20th of May build has some problems with duration in logical switches. Look at https://github.com/opentx/opentx/issues/1122. You should try later builds.

User avatar
dinamich
Posts: 288
Joined: Mon Apr 01, 2013 1:21 pm
Country: Slovenia
Location: Ljubljana

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by dinamich » Mon May 26, 2014 1:16 pm

davx wrote:Hi,
Kilrah wrote:make PCB=TARANIS TRANSLATIONS=FR HELI=NO.

The others are now defined by default in the makefile (see around line 640 for next).
I've found that the equivalent options for fr, noheli and notemplates in Companion was make PCB=TARANIS GVARS=YES TRANSLATIONS=FR and my last build with these parameters weighted 252020 bytes (23.05.2014 17H54).

Could you tell me what you get with the last commits ?
Bin size varies (considerably) with the version and even build/system of compiler used, take a look at this comment https://github.com/opentx/opentx/pull/8 ... t-38349682

User avatar
MicheleVilla
Posts: 66
Joined: Thu Apr 10, 2014 4:13 pm
Country: -

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by MicheleVilla » Mon May 26, 2014 4:19 pm

Hi
I have just download last build of firmware
Opentx-Taranis-en.bin 26/05/2014 19:20
receiver XR8

The voltage of rx battery is everytime 1.70V

There is some change in parameter can I do?

davx
Posts: 210
Joined: Sun Sep 15, 2013 7:01 am
Country: -

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by davx » Mon May 26, 2014 4:31 pm

dinamich wrote:
Bin size varies (considerably) with the version and even build/system of compiler used, take a look at this comment https://github.com/opentx/opentx/pull/8 ... t-38349682
Yes, I knew that the build size could be different depending on the compiler, that's why I wanted to make a direct comparison.
I'm currently using the toolchain found in the Ubuntu repository: gcc-arm-none-eabi 4-8-2-14ubuntu1+6.

Thanks for the link, very interesting, I read that 4.8 version could be problematic so I'll be careful.

Tchao

Helle
Posts: 577
Joined: Sat Jul 21, 2012 7:08 am
Country: -

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by Helle » Mon May 26, 2014 5:28 pm

Hy, boys ,
main Problem is, that if you have installed companion1.99.1
and you will donwload a firmware,
all old Firmwares from 21.05 to 24.05. with all the div. options is ready compiled and it has errors
at phy. switches, log. siwtches and no ON and no One at SF
This in all languages expect of english.

Software after 25.05. has not this switch errors,
but at SF no ON and no One in all languages expect of english.

Hope today when 1.99.2 will come all Firmware will new compiled to V1.99.2
But at SF no ON and no One in all languages expect of english.

At all language files line 432, 434. 436, at then end missing the Strings "ON\0" "One"
issues #1139

Helle

bertrand35
9x Developer
Posts: 2764
Joined: Fri Dec 30, 2011 11:11 pm
Country: -

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by bertrand35 » Mon May 26, 2014 5:46 pm

MicheleVilla wrote:Hi
I have just download last build of firmware
Opentx-Taranis-en.bin 26/05/2014 19:20
receiver XR8

The voltage of rx battery is everytime 1.70V

There is some change in parameter can I do?
What was your range on A1 (before the update to 1.99.2) ?

User avatar
MicheleVilla
Posts: 66
Joined: Thu Apr 10, 2014 4:13 pm
Country: -

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by MicheleVilla » Mon May 26, 2014 5:51 pm

is 13.2V but on A1 there isn't any signal
when I connect battery appears on RX batt 1.70V
(in telemetry page)

bertrand35
9x Developer
Posts: 2764
Joined: Fri Dec 30, 2011 11:11 pm
Country: -

Re: OpenTX - Nightly builds for pre-2.0 testing

Post by bertrand35 » Mon May 26, 2014 5:59 pm

I am on this bug, it's an overflow. The spec doesn't say what is the unit, it doesn't help :)


Post Reply

Return to “openTx”