Does OpenTX support timer up + beep

[offers]

Hi

I like to have the timer to beep me after 8min, but i need to to count up!
So i will know when i land the total flight time.
Can i do that in openTX?

I moved from ER9x a while ago, and there it is possible.

Note: the other time used for different thing.

[Hippo]

I haven't tested this, but it should be possible to do with a custom switch.

Set the switch to timer > 8:00, with a limited duration, and then use that switch to play a sound.

Just tested, and it works! I had to set another switch to < time, and use AND so the beeping would stop at a set time as well.

[Rob Thomson]

There are two timers available.

Set timer two to a starting value of 00:00. And assign a trigger to turn it on. A switch?

The timer will then count upward!

[bertrand35]

I would see another issue for this one.

[offers]

Hi hippo
If i use this trick, i have found other trick to silent the time

Rob, as i wrote i use the other timer.

Does other fill like me that it worth to request an enhancement, so openTX fill this gap with the er9x?