Dont setpoint: v<ofs A1 0.00v voltage adj. (stock boar)

[njozsef]

Hi Developers.
I tried the custom switch settings the "custom warning voltage alarm".
I tried settings for v<ofs A1 0.000v.

I dont see the setpoint. only the current measured value is displayed (A1).
Setpoint adjust working plus or minus button, but invisible.

Companion9x is also not adjustable.

Please help.
Thank you

[bertrand35]

For A1 and A2, you have to define a range and an unit in the TELEMETRY menu. If the range is 0V, then it will be impossible to have anything else than 0 there!
Bertrand.

[njozsef]

Bertrand you are a god.
Thank you.


Please change topic prefix to SOLVED
THX