Upgrader to 2.3.15 on a D9XSE-2019

openTx has introduced a range of new features, ideas and bling. It is fast becoming the firmware of choice for many users. openTx will run on ALL current hardware platforms, including the gruvin9x and sky9x boards. Work has already started to support the new FrSky X9D radio!
Post Reply
cattlebaron
Posts: 27
Joined: Sat Jan 11, 2014 8:58 am
Country: -

Upgrader to 2.3.15 on a D9XSE-2019

Post by cattlebaron »

I can not get my TX to the firmware upgrade as the "three finger salute" won't work. At one stage I was advised the double click the on/off switch while applying the TFS would work but alas I can't get that to work either. I have attempted to upgrade using OpenTX Companion 2.3.15 but get an error message that it can't do it for "an unknown reason". Can anyone help

Thanks in anticipation

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Upgrader to 2.3.15 on a D9XSE-2019

Post by Kilrah »

With the trims held in you're doing a short press of the power button and not a long one, right?
cattlebaron
Posts: 27
Joined: Sat Jan 11, 2014 8:58 am
Country: -

Re: Upgrader to 2.3.15 on a D9XSE-2019

Post by cattlebaron »

I have tried both short presses and long i.e. till the TX turns on press to no avail.
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Upgrader to 2.3.15 on a D9XSE-2019

Post by Kilrah »

Do the trims work normally? One may be faulty.
cattlebaron
Posts: 27
Joined: Sat Jan 11, 2014 8:58 am
Country: -

Re: Upgrade to 2.3.15 on a D9XSE-2019

Post by cattlebaron »

I am at a loss, seems my replies disappear into thin air. I have tried all sorts of combinations with no result, sorry. I am at a loss!

cattlebaron
Posts: 27
Joined: Sat Jan 11, 2014 8:58 am
Country: -

Re: Upgrader to 2.3.15 on a D9XSE-2019

Post by cattlebaron »

I'm still mystified, suddenly this morning the radio behaved as it should and I was able to flash both the bootloader and firmware. Lucky me but why? I also have loaded the new SDcard with all my files and now the TX is stumm. I works fine when connected to openTX companion ie when in special functions all sounds will play but not on the TX.
cattlebaron
Posts: 27
Joined: Sat Jan 11, 2014 8:58 am
Country: -

Re: Upgrader to 2.3.15 on a D9XSE-2019

Post by cattlebaron »

Is there a convention to naming the SDcard? I have given it a name D9XSE2315. I noticed that when upgrading the firmware to version 2.3.15 I had to use the name supplied by the system, previously one had to shorten the name as the system could not deal with long names. Any know? A quick reminder "It works fine when connected to openTX companion ie when in special functions all sounds will play, but not on the TX."

Post Reply

Return to “openTx”