Accuracy of individual cell voltage callout

openTx has introduced a range of new features, ideas and bling. It is fast becoming the firmware of choice for many users. openTx will run on ALL current hardware platforms, including the gruvin9x and sky9x boards. Work has already started to support the new FrSky X9D radio!
Post Reply
DForbes
Posts: 2
Joined: Mon Jan 20, 2020 6:56 pm
Country: -

Accuracy of individual cell voltage callout

Post by DForbes »

Hey guys, I am using an S8R with FLVSS and would like to know if it's possible to get voltage callouts to a third decimal point accuracy (4.11V) vs how it currently rounds up/down to two decimal points (4.1V)?

Thanks,

Dennis
Top
User avatar
Kilrah
Posts: 11109
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Accuracy of individual cell voltage callout

Post by Kilrah »

No, not possible, it fluctuates too much with noise to make any sense. You can set a value to 2 decimal in a logical switch to trigger an action though.
Top
DForbes
Posts: 2
Joined: Mon Jan 20, 2020 6:56 pm
Country: -

Re: Accuracy of individual cell voltage callout

Post by DForbes »

Kilrah wrote: ↑Mon Jan 20, 2020 7:24 pm No, not possible, it fluctuates too much with noise to make any sense. You can set a value to 2 decimal in a logical switch to trigger an action though.
OK c**p wishful thinking I guess LOL. It seems like it would be accurate enough as my telemetry screen is dead on to what my FLVSS is reading???

So logical switch will call out "4.1V" or "4.11V", thanks!

volt.JPG
Top
Post Reply

Return to “openTx”