2 Flap Servo - 2 Aileron Servo - 2 Mixes

[ltsmash]

I have the Dynam Primo - with 2 flap servos and 2 aileron servos...flaps only go into the down position - This setup would be simlar to the Timber by Eflite

I want to
1. Flaps on a 3 position switch - elevator mix and limit the flaps to about 80% down due to binding - Switch A Hi, Switch A Med Switch A Low
2. Enable the flaps as alerion with the 2 position switch on / off ( but keep the Switch A working) So this would make the entire wing an aileron