Jumper T16 Nightlie Build

openTx has introduced a range of new features, ideas and bling. It is fast becoming the firmware of choice for many users. openTx will run on ALL current hardware platforms, including the gruvin9x and sky9x boards. Work has already started to support the new FrSky X9D radio!
Post Reply
BillE
Posts: 24
Joined: Sat Aug 17, 2019 3:21 am
Country: -

Jumper T16 Nightlie Build

Post by BillE »

I am trying to update my Jumper T16 Pro from JumperTX to OpenTX using the nightlie build.

I have downloaded the latest 2.3.3N54 build through companion. I copied the file to the SD Card Firmware folder. I start the TX in bootloader mode, select Write Firmware, select the file, click "Enter" to select the file. However the screen then goes weird as per the photo - the text from Version to mperTX and the green tick are flashing.

Any help gratefully received!
jumper.jpg

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Jumper T16 Nightlie Build

Post by Kilrah »

Have you updated the bootloader? If not you should probably rather flash using companion and the radio powered off.
BillE
Posts: 24
Joined: Sat Aug 17, 2019 3:21 am
Country: -

Re: Jumper T16 Nightlie Build

Post by BillE »

Many thanks for the reply.

I haven't updated the bootloader.

Companion won't communicate the TX when it's turned off. I have installed the STM32 Bootloader but still nothing.

Post Reply

Return to “openTx”