Throttle messed up on QX7 for one model
-
- Posts: 33
- Joined: Sat Jul 27, 2019 7:02 pm
- Country: -
Throttle messed up on QX7 for one model
I'm pulling my hair out trying to decipher what my issue is. I just setup a new model for a Focke Wulf War bird. For some dumb reason beyond my comprehension, My throttle is not working unless I hold the timer reset button in and have it off throttle hold. I have attached the OTX file. The Tundra, the Edge, and the 470 all work fine and don't require me to hold the timer reset switch in. As far as I know, they are all set the same way. Can someone please review and tell me what I am missing?
- Attachments
-
- Latest Backup of Radio.otx
- (2.87 KiB) Downloaded 203 times
-
- Posts: 750
- Joined: Tue Dec 27, 2011 11:22 pm
- Country: United States
- Location: Carson City, Nv
Re: Throttle messed up on QX7 for one model
In the mixes you have throttle cut set to SHup.
Since that is the normal position, the throttle is cut unless you hold SHdown.
You probably meant to use SF.
Since that is the normal position, the throttle is cut unless you hold SHdown.
You probably meant to use SF.
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
-
- Posts: 33
- Joined: Sat Jul 27, 2019 7:02 pm
- Country: -
Re: Throttle messed up on QX7 for one model
Yep, I did end up pulling up the settings again and comparing to another when I did realize that one line was in there so I deleted it. All good now. one silly line is all it takes. lol