9XR Pro with opentx 2.2.2 not working

openTx has introduced a range of new features, ideas and bling. It is fast becoming the firmware of choice for many users. openTx will run on ALL current hardware platforms, including the gruvin9x and sky9x boards. Work has already started to support the new FrSky X9D radio!
Post Reply
JRMSR01
Posts: 20
Joined: Sat Apr 21, 2018 11:24 pm
Country: -

9XR Pro with opentx 2.2.2 not working

Post by JRMSR01 »

Can anyone verify this is working for them
Opentx 2.2.2 and Turnigy 9XR Pro.profile radio

None of the inputs after I1-I4. Seem to be working HOLD
WHATER EVER I program for I5-I8.(thr input for pitch cutie) works until Insave the model file
Then close and reload the model file it has changed (thr) to (P2); and of course no pitch curve now
If I download model file to trans. It also changes I4-I8 in the trans to (Px)

In short 9XR Pro radio configuration does not work. I have a X9D+ configuration and it works fine

How can a program “SAVE” Change the program memory arbitrarily

Does anyone have 9XR Pro working correctly on all inputs
If I put the input lines in mixers it seems to HOLD

JRMSR01
Posts: 20
Joined: Sat Apr 21, 2018 11:24 pm
Country: -

Re: 9XR Pro with opentx 2.2.2 not working

Post by JRMSR01 »

Well I guess I anuswered my own question
Only inputs I1-I4 work with a 9XR PRO radio configuration in 2.2.2
Have to put the input lines you would have used, into mixes tab I5-I8

This is a very significant failure; is their place where this has been documented. Opentx advertises compcatible with 9XR PRO
User avatar
OctavioS
Posts: 657
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

Re: 9XR Pro with opentx 2.2.2 not working

Post by OctavioS »

I sugest you go here.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
JRMSR01
Posts: 20
Joined: Sat Apr 21, 2018 11:24 pm
Country: -

Re: 9XR Pro with opentx 2.2.2 not working

Post by JRMSR01 »

can you give me any more info, need to sign up for this, what is it, what do I do their
is it the developers site
you show 9XRpro do you use opentx 2.2.2 with it???
User avatar
OctavioS
Posts: 657
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

Re: 9XR Pro with opentx 2.2.2 not working

Post by OctavioS »

JRMSR01 wrote: Fri Nov 23, 2018 1:38 am can you give me any more info, need to sign up for this, what is it, what do I do their
is it the developers site
you show 9XRpro do you use opentx 2.2.2 with it???
No m8, for the 9xr pro i use ersky9x. You should give it a try.

That chat room is for almost real time conversation with the devs and community.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.

Post Reply

Return to “openTx”