Variable End Point?
- mapes12
- Posts: 138
- Joined: Tue Jul 09, 2013 6:44 am
- Country: United Kingdom
- Location: Lichfield UK
- Contact:
Variable End Point?
I'm installing a Bavarian Demon Cortex in a petrol model. The tutorial vid shows a 3 POS switch being used to change flight modes. A Spectrum radio is used in the vid and it recommends using "end points" the adjust the gain. In OpenTX I can assign a 3 POS switch just the same as in the vid but I'm thinking of using a knob to adjust the gain on the fly. How can this be accomplished please?
-
- Posts: 183
- Joined: Sat Mar 29, 2014 10:44 pm
- Country: United States
- Location: Coral Springs, FL
Re: Variable End Point?
I am assuming here your Gyro accepts an input for variable gain. The way to achieve that, is to assign the knob to a channel, and use that channel to control the gain. I have that implemented with a Hobby Eagle A3SII, and works just fine. Hopefully you have two free channels in the receiver (one for mode and other for gain), otherwise, you will have to use SBUS between the Gyro and the RX. Another option is to use both the normal PWM channels and the "SBUS decoder" to extract extra 4 channels from the SBUS to the Gyro.
Hope all this help, otherwise, let me know.
Hope all this help, otherwise, let me know.
Richard