MiniHub+ - S.Port Telemetry Hub for Frsky Radios

openTx has introduced a range of new features, ideas and bling. It is fast becoming the firmware of choice for many users. openTx will run on ALL current hardware platforms, including the gruvin9x and sky9x boards. Work has already started to support the new FrSky X9D radio!
Post Reply
User avatar
ckleanth
Posts: 81
Joined: Sun Dec 23, 2012 11:19 pm
Country: United Kingdom
Contact:

MiniHub+ - S.Port Telemetry Hub for Frsky Radios

Post by ckleanth »

MiniHub+ - S.Port Telemetry Hub for Frsky Radios

I predominantly fly gasoline engine powered planes so it is important to me to use a device that work with the standard Tachometer leads from most gasoline engine ignitions. In addition monitor onboard voltage and engine temperatures.

This is what the new MiniHub+ (for FrSky/Taranis/Horus) does. It works with the standard Tachometer leads from most gasoline engine ignitions. The ignition system has conditioned the signal and it is easily used for the MiniHub+'s RPM header.

The MiniHub+ has also two temperature ports (you will need the FrSky thermistors FrSky TEMS-01) and three voltage inputs (0 to 5v, currently you will need the frsky voltage step down circuit FrSky FBVS to measure up to 5S LiPo battery).

The MiniHub+2/4 (can be used for multi engines) and to use two devices daisy chained together it requires OpenTX 2.1+ due to telemetry sensor ID assignment)

For more information please visit the following page.

https://www.rcgroups.com/forums/showthr ... sky-Radios
Last edited by ckleanth on Wed Aug 09, 2017 1:20 pm, edited 3 times in total.
If it has wings it will fly...

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: MiniHub+ - Telemetry Hub for Frsky Radios running OpenTX

Post by MikeB »

Why only for openTx? If it uses the SPort, why won't it work with ersky9x?

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
ckleanth
Posts: 81
Joined: Sun Dec 23, 2012 11:19 pm
Country: United Kingdom
Contact:

Re: MiniHub+ - Telemetry Hub for Frsky Radios running OpenTX

Post by ckleanth »

MikeB wrote: Sun Aug 06, 2017 7:53 pm Why only for openTx? If it uses the SPort, why won't it work with ersky9x?

Mike.
not tested it mike. It should but I'm not using ersky9x. Can I send you one to try?
If it has wings it will fly...
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: MiniHub+ - Telemetry Hub for Frsky Radios running OpenTX

Post by MikeB »

If you can spare one, I'll test it out.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
ckleanth
Posts: 81
Joined: Sun Dec 23, 2012 11:19 pm
Country: United Kingdom
Contact:

Re: MiniHub+ - Telemetry Hub for Frsky Radios running OpenTX

Post by ckleanth »

MikeB wrote: Mon Aug 07, 2017 8:42 am If you can spare one, I'll test it out.

Mike.
Pm me your address mate. I will make one and send to you
If it has wings it will fly...

Post Reply

Return to “openTx”