Baudrate for the SBUS pin output

openTx has introduced a range of new features, ideas and bling. It is fast becoming the firmware of choice for many users. openTx will run on ALL current hardware platforms, including the gruvin9x and sky9x boards. Work has already started to support the new FrSky X9D radio!
Post Reply
St7ven
Posts: 2
Joined: Wed Nov 06, 2019 4:16 pm
Country: -

Baudrate for the SBUS pin output

Post by St7ven » Wed Nov 06, 2019 4:20 pm

Hi Everyone,

I'm doing some experiments with a board that only accepts standard baud-rate. As you may know, the SBUS is 100 000 Bdps (on the external RF port with high level = Vbat). Is there a menu where I can change the baud-rate? I saw some when you have a cross-fire connected to it (https://blog.seidel-philipp.de/fixed-in ... frsky-qx7/), but this menu does appear for me (no baudrate selection). I'm running on the 2.3.1 version of OpenTX.

Thank you for the help


User avatar
Kilrah
Posts: 10271
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Baudrate for the SBUS pin output

Post by Kilrah » Thu Nov 07, 2019 12:26 am

No, not without modifying source code and compiling your own firmware.

St7ven
Posts: 2
Joined: Wed Nov 06, 2019 4:16 pm
Country: -

Re: Baudrate for the SBUS pin output

Post by St7ven » Thu Nov 07, 2019 6:56 am

Thank you for your answer !


Post Reply

Return to “openTx”