How to edit flash sceen

If you have a splash screen design you would like to share. Post it here!
Post Reply
Craig
Posts: 12
Joined: Mon May 14, 2012 5:00 pm
Country: -

How to edit flash sceen

Post by Craig »

Okay, I want to put my name as pilot on the stock flash screen. How do I pull that from the hex fill to place in my editor?

User avatar
Rob Thomson
Site Admin
Posts: 4543
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Re: How to edit flash sceen

Post by Rob Thomson »

What firmware? If you are running er9x, there is an option to enter your name; and an option to turn the name display on/off.

long press the left button to get to it!
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Craig
Posts: 12
Joined: Mon May 14, 2012 5:00 pm
Country: -

Re: How to edit flash sceen

Post by Craig »

Okay, Thank you.
Oshb5ems
Posts: 43
Joined: Sun Apr 08, 2012 11:46 am
Country: -

Re: How to edit flash sceen

Post by Oshb5ems »

Hi

Is there spacific software for designing splash screens please?

Regs Os
User avatar
Crashj007
Posts: 133
Joined: Tue Jan 31, 2012 11:44 pm
Country: -
Location: Raleigh, NC, USA
Contact:

Re: How to edit flash sceen

Post by Crashj007 »

Oshb5ems, MS Paint works okay. You just need to be able to save as a monochrome BMP file, 64 x 128 bits.
There are two different things being discussed here, pilot name, and splash screen. If you search for the splash screen discussion there is a whole thread devoted to how to do it.
viewforum.php?f=43
--
FS-TH9X 2.4GHz 9CH from Nitroplanes
Smartieparts board & backlight
Stock Flysky RF and mainboard
er9x FW V 744

Helle
Posts: 577
Joined: Sat Jul 21, 2012 7:08 am
Country: -

Re: How to edit flash sceen

Post by Helle »

Hy,

I take Irfanview
load splash, zoom it,
open draw equipment
change or modify a splash
save as BMP
ready

Helle

Post Reply

Return to “Splash Screen Library”