How to save as hex?

If you have a splash screen design you would like to share. Post it here!
Post Reply
mambamax1
Posts: 30
Joined: Wed Aug 01, 2012 9:24 pm
Country: -

How to save as hex?

Post by mambamax1 » Thu Aug 09, 2012 9:11 pm

I've looked at the instructions for a while now, but I simply can't save any of the splashes I downloaded as a hex file. I get an "error reading" message?

What I did:

Click on "load image"
Click "save to hex"


Help is appreciated! :D


User avatar
Kilrah
Posts: 10041
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: How to save as hex?

Post by Kilrah » Thu Aug 09, 2012 9:55 pm

You need to first load an existing .hex (the one for the firmware you want to use), then open the image (it will replace the original one that is in the .hex), then save the result. In the order of the buttons really ;)

mambamax1
Posts: 30
Joined: Wed Aug 01, 2012 9:24 pm
Country: -

Re: How to save as hex?

Post by mambamax1 » Thu Aug 09, 2012 10:34 pm

Got it. Thanks!


Quick question though. Is there a way to get rid of the "blank space" where my name used to be? There is a blank block impeding on the image where my name once was.

User avatar
MikeB
9x Developer
Posts: 16520
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: How to save as hex?

Post by MikeB » Thu Aug 09, 2012 11:04 pm

Somewhere on the RADIO SETUP screen is an option for Splash Name, set this to OFF.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

mambamax1
Posts: 30
Joined: Wed Aug 01, 2012 9:24 pm
Country: -

Re: How to save as hex?

Post by mambamax1 » Thu Aug 09, 2012 11:25 pm

Thanks!


Post Reply

Return to “Splash Screen Library”