turnigy 9X parts for sale or trade

Mechcondrid · Post by **Mechcondrid** » Thu Apr 19, 2012 9:13 pm

hey just burnt out my spare 9x mainboard (again!) so im selling the rest of the spare radio off for parts now that i have a ersky beta board.
anyone need any particular parts? switches, pots, stick assemblies, or screens?
first come first served

im gonna do a flat rate for shipping ($6us USPS priority mail /w tracking)
and flat rate of $4.50us for all parts cept the screens (those are $3us)

or if you got anything to trade
post it and i'll take a look
and it dont have to be rc related
i'll even look at electronics components (could always use more caps/resistors/ICs)

P.S.

if this is the wrong place for this lock and let me know kindly!

Post by **cre8tiveleo** » Thu Apr 19, 2012 10:33 pm

Case? I'd be interested in what you got.

Mechcondrid · Post by **Mechcondrid** » Thu Apr 19, 2012 11:16 pm

ya thats fine fair warning though the front power switch board has been canabilized a bit so no buzzer or 5v reg (and of course no main board due to being fryilated)
other than that the sticks were mode 1 but i reversed the pot signals to mode 2 the rest is stock
do you want both screens as well?

Post by **cre8tiveleo** » Fri Apr 20, 2012 2:59 am

surely.

Mechcondrid · Post by **Mechcondrid** » Fri Apr 20, 2012 12:47 pm

hey for some reason it says you dont accept PMs
mind sending me your info in a pm or email

Post by **Romolo** » Fri Apr 27, 2012 7:25 pm

Mechcondrid wrote:hey just burnt out my spare 9x mainboard (again!) so im selling the rest of the spare radio off for parts now that i have a ersky beta board.
anyone need any particular parts? switches, pots, stick assemblies, or screens?
first come first served

im gonna do a flat rate for shipping ($6us USPS priority mail /w tracking)
and flat rate of $4.50us for all parts cept the screens (those are $3us)

or if you got anything to trade
post it and i'll take a look
and it dont have to be rc related
i'll even look at electronics components (could always use more caps/resistors/ICs)

P.S.

if this is the wrong place for this lock and let me know kindly!

I'm interested in long lever switches (especially those in the back part of the radio)
Let me know...

Post by **ShowMaster** » Sat Apr 28, 2012 4:16 am

Mechcondrid wrote:ya thats fine fair warning though the front power switch board has been canabilized a bit so no buzzer or 5v reg (and of course no main board due to being fryilated)
other than that the sticks were mode 1 but i reversed the pot signals to mode 2 the rest is stock
do you want both screens as well?

Reversed pot signals? I thought just the spring and the two metal pins had to be changed? Also a menu selection Please explain.
I have a mod 1 in the box waiting for conversion.
SM

gohsthb · Post by **gohsthb** » Sat Apr 28, 2012 3:27 pm

Mode 1
Left stick - Elevator/Rudder
Right stick - Throttle/Aileron.

Mode 2
Left stick - Throttle/Rudder
Right Stick - Elevator/Aileron

If you swap the connections throttle and elevator pots you end up with mode 2 that the radio thinks is mode 1. So on his radio he will need to set it as mode 1 always even though he is flying mode 2. I think it would have just been easier to change it in a menu. Which is possible even in the stock firmware.
-Gohst

msev · Post by **msev** » Tue May 29, 2012 9:32 am

Hi are you still offering parts for sale? Id be interested in the stock 9x transmitter module, if it hasn't burned up? And maybe in the "throttle side" gimbal?

RyanTanner · Post by **RyanTanner** » Wed Jun 20, 2012 6:11 pm

I left mine in the sun a little too long and the display cover warped severely. Just to be specific, it is the clear window that sticks to the outside of the case to protect the display on the right side it includes the labels for the "menu" and "exit" buttons. It is not the display itself. would you be willing to sell me yours? I'll give you a couple bucks for it.

Post by **Rob Thomson** » Wed Jun 20, 2012 6:36 pm

R2 hobbies can provide the display covers for the eurgle branded versions.

Sent from my iPhone using Tapatalk

rcpilot4life · Post by **rcpilot4life** » Tue Jul 24, 2012 12:40 am

I could really use a gimbal assembly with the 2 potentiometers atatched. Do you have one and how much?

openrcforums