turnigy 9X parts for sale or trade
- Mechcondrid
- Posts: 222
- Joined: Fri Dec 30, 2011 3:53 am
- Country: -
- Location: ledyard, connecticut, United States
- Contact:
turnigy 9X parts for sale or trade
hey just burnt out my spare 9x mainboard (again!) so im selling the rest of the spare radio off for parts now that i have a ersky beta board.
anyone need any particular parts? switches, pots, stick assemblies, or screens?
first come first served
im gonna do a flat rate for shipping ($6us USPS priority mail /w tracking)
and flat rate of $4.50us for all parts cept the screens (those are $3us)
or if you got anything to trade
post it and i'll take a look
and it dont have to be rc related
i'll even look at electronics components (could always use more caps/resistors/ICs)
P.S.
if this is the wrong place for this lock and let me know kindly!
anyone need any particular parts? switches, pots, stick assemblies, or screens?
first come first served
im gonna do a flat rate for shipping ($6us USPS priority mail /w tracking)
and flat rate of $4.50us for all parts cept the screens (those are $3us)
or if you got anything to trade
post it and i'll take a look
and it dont have to be rc related
i'll even look at electronics components (could always use more caps/resistors/ICs)
P.S.
if this is the wrong place for this lock and let me know kindly!
Last edited by Mechcondrid on Fri Apr 20, 2012 4:53 pm, edited 2 times in total.
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
Re: turnigy 9X parts for sale or trade
Case? I'd be interested in what you got.
- Mechcondrid
- Posts: 222
- Joined: Fri Dec 30, 2011 3:53 am
- Country: -
- Location: ledyard, connecticut, United States
- Contact:
Re: turnigy 9X parts for sale or trade
ya thats fine fair warning though the front power switch board has been canabilized a bit so no buzzer or 5v reg (and of course no main board due to being fryilated)
other than that the sticks were mode 1 but i reversed the pot signals to mode 2 the rest is stock
do you want both screens as well?
other than that the sticks were mode 1 but i reversed the pot signals to mode 2 the rest is stock
do you want both screens as well?
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
- Mechcondrid
- Posts: 222
- Joined: Fri Dec 30, 2011 3:53 am
- Country: -
- Location: ledyard, connecticut, United States
- Contact:
Re: turnigy 9X parts for sale or trade
hey for some reason it says you dont accept PMs
mind sending me your info in a pm or email
mind sending me your info in a pm or email
-
- 9x Developer
- Posts: 1109
- Joined: Sat Dec 31, 2011 12:11 am
- Country: -
- Location: Massa (MS), Tuscany, Italy
Re: turnigy 9X parts for sale or trade
I'm interested in long lever switches (especially those in the back part of the radio)Mechcondrid wrote:hey just burnt out my spare 9x mainboard (again!) so im selling the rest of the spare radio off for parts now that i have a ersky beta board.
anyone need any particular parts? switches, pots, stick assemblies, or screens?
first come first served
im gonna do a flat rate for shipping ($6us USPS priority mail /w tracking)
and flat rate of $4.50us for all parts cept the screens (those are $3us)
or if you got anything to trade
post it and i'll take a look
and it dont have to be rc related
i'll even look at electronics components (could always use more caps/resistors/ICs)
P.S.
if this is the wrong place for this lock and let me know kindly!
Let me know...
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: turnigy 9X parts for sale or trade
Reversed pot signals? I thought just the spring and the two metal pins had to be changed? Also a menu selection Please explain.Mechcondrid wrote:ya thats fine fair warning though the front power switch board has been canabilized a bit so no buzzer or 5v reg (and of course no main board due to being fryilated)
other than that the sticks were mode 1 but i reversed the pot signals to mode 2 the rest is stock
do you want both screens as well?
I have a mod 1 in the box waiting for conversion.
SM
Re: turnigy 9X parts for sale or trade
Mode 1
Left stick - Elevator/Rudder
Right stick - Throttle/Aileron.
Mode 2
Left stick - Throttle/Rudder
Right Stick - Elevator/Aileron
If you swap the connections throttle and elevator pots you end up with mode 2 that the radio thinks is mode 1. So on his radio he will need to set it as mode 1 always even though he is flying mode 2. I think it would have just been easier to change it in a menu. Which is possible even in the stock firmware.
-Gohst
Left stick - Elevator/Rudder
Right stick - Throttle/Aileron.
Mode 2
Left stick - Throttle/Rudder
Right Stick - Elevator/Aileron
If you swap the connections throttle and elevator pots you end up with mode 2 that the radio thinks is mode 1. So on his radio he will need to set it as mode 1 always even though he is flying mode 2. I think it would have just been easier to change it in a menu. Which is possible even in the stock firmware.
-Gohst
Re: turnigy 9X parts for sale or trade
Hi are you still offering parts for sale? Id be interested in the stock 9x transmitter module, if it hasn't burned up? And maybe in the "throttle side" gimbal?
-
- Posts: 1
- Joined: Wed Jun 20, 2012 6:07 pm
- Country: -
Re: turnigy 9X parts for sale or trade
I left mine in the sun a little too long and the display cover warped severely. Just to be specific, it is the clear window that sticks to the outside of the case to protect the display on the right side it includes the labels for the "menu" and "exit" buttons. It is not the display itself. would you be willing to sell me yours? I'll give you a couple bucks for it.
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
turnigy 9X parts for sale or trade
R2 hobbies can provide the display covers for the eurgle branded versions.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
-
- Posts: 3
- Joined: Mon Jul 23, 2012 4:19 pm
- Country: -
Re: turnigy 9X parts for sale or trade
I could really use a gimbal assembly with the 2 potentiometers atatched. Do you have one and how much?