FrSky modules

dannyco · Post by **dannyco** » Mon Jun 11, 2012 7:01 am

Hi,guys!
I have a FlySky remote and I want to replace the original Tx/Rx modules with a Frsky D8R-II plus (Rx)
and Frsky 2.4GHz DJT (Tx). I'm not interesting about telemetry. It is possible?
Thank you in advance.

Post by **Rob Thomson** » Mon Jun 11, 2012 7:03 am

Yes. of course.

The telemetry mods are only required if you want to feed the telemetry information onto the transmitters display.

In your case.. simly use the 'basic' firmware without the frsky extentions.

Rob

dannyco · Post by **dannyco** » Mon Jun 11, 2012 7:16 am

Thank you for reply.
So is the Tx plug and play?
Danny

dannyco · Post by **dannyco** » Mon Jun 11, 2012 7:20 am

The Tx is plug and play?

Post by **jhsa** » Mon Jun 11, 2012 8:35 am

You can still have access to basic telemetry without the on screen mods.. RSSI for example.. the module will beep anyway if suddenlly your link gets weaker for some reason..
You can even through a little program configure your voltage dividers so your module will beep when pack/receiver voltage is low..
I know you're not interested, I just wrote this for your information in case you didn't know it..

dannyco · Post by **dannyco** » Mon Jun 11, 2012 9:27 am

Thank you for reply.
One more question: it's the TX module plug'n play on my FlySky?
Thanks.

Post by **jhsa** » Mon Jun 11, 2012 9:40 am

Yes, the DJT module is.. just plug it in the back, bind your receivers, DO A RANGE TEST, and go fly

Post by **ShowMaster** » Tue Jun 12, 2012 1:38 am

Also take a looK at the fld-02 if you still want telemetry readings and more. It just plugs into your DJT module no soldering
SM

openrcforums

FrSky modules

FrSky modules

Re: FrSky modules

Re: FrSky modules

Re: FrSky modules

Re: FrSky modules

Re: FrSky modules

Re: FrSky modules

Re: FrSky modules