Turnigy 9X Spektrum DSM2 AIRMOD with AR7010 JR-Compatible SPMMSJR720

Choosing an RF Module? What modules work? What is compatible with the 9x?
Post Reply
Jellono
Posts: 22
Joined: Fri Oct 23, 2015 4:18 am
Country: -

Turnigy 9X Spektrum DSM2 AIRMOD with AR7010 JR-Compatible SPMMSJR720

Post by Jellono »

Hello,

I had just purchased the Spektrum DSM2 AIRMOD with AR7010 JR-Compatible SPMMSJR720, and was having real problems binding it to my Blade Nano Qx. After some frustrating time I finally checked out the protocol section on the receiver and

Protocol:
Proto : PPM
Channels : 8CH
Time: 400uSec
Frame Length: 20.0Sec
1St chan
Pulse Polarity : NEG


Attached is my Model that works with my Nano Qx.

It has the following.

Rudder: is Custom curve for me on curve 4 (I am learning and keep rotating while using the throttle)

Curve 1: -60,-30,0,30,60 to 1 of 3 on Flight Mode Switch
Curve 2: -80,-40,0,40,80 to 2 of 3 on Flight Mode Switch
Curve 2: -100,-50,0,50,100 to 3 of 3 on Flight Mode Switch

Train Switch: Toggles Acro / Safe Mode

Throttle Switch: Enables disables Throttle

Countdown: 5 minutes tied to throttle (My nano flys about 5 minutes per charge)

Voice: On flight mode change Throttle Switch and Chirp when in or out of Acro mode.

Mixers:
CH01 +100%Thr
CH02 -100%Ail Switch() Curve(c1)
-100%Ail Switch() Curve(c2)
-100%Ail Switch() Curve(c3)
CH03 +100%Ele Switch() Curve(c1)
+100%Ele Switch() Curve(c3)
+100%Ele Switch() Curve(c2)
CH04 -100%Rud Curve(c4)
CH05
CH06 +100%FULL Switch()
Attachments
NanoQX.eepm
(3.41 KiB) Downloaded 669 times

Daedalus66
Posts: 1844
Joined: Tue Dec 27, 2011 8:22 pm
Country: -
Location: Ottawa

Re: Turnigy 9X Spektrum DSM2 AIRMOD with AR7010 JR-Compatible SPMMSJR720

Post by Daedalus66 »

All channels should be set to +/-80% limits to equal Spektrum pulse widths (except low throttle should be -100 to ensure arming). Channels 2 and 4 should be set to INV to get correct control direction


Sent from my iPad using Tapatalk
Post Reply

Return to “RF MODULES”