Help Me

[MGTRc]

Turnigy 9X module connector jumped inside.Beause Connect the antenna cable hooked up to the reverse module. This event may have damaged the controller?

[Crucial]

Do you have pics of the damage? English is obviously not your first language so the description is not coming across very well.

[rperkins]

I shorted out the voltage on the pins in the module bay. It burned a trace on the small board in the middle of the radio. Here is a picture. I fixed the burnt trace with a small red wire. I wasted a lot of time on this because I thought I had blew the voltage regulator, but this narrow trace acted like a fuse