pin assignment module bay

Choosing an RF Module? What modules work? What is compatible with the 9x?
Post Reply
manu
Posts: 106
Joined: Thu Dec 29, 2011 7:02 am
Country: -
Location: St. Gallen, Switzerland

pin assignment module bay

Post by manu » Sun Dec 09, 2012 11:48 am

I know, it's somewhere but I don't find the pin assignment in the module bay.
Does anybody know?
regards
manu


User avatar
Kilrah
Posts: 10795
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: pin assignment module bay

Post by Kilrah » Sun Dec 09, 2012 11:53 am

Image

pmullen503
Posts: 264
Joined: Sun May 06, 2012 8:37 pm
Country: -
Location: Fond du Lac, WI

Re: pin assignment module bay

Post by pmullen503 » Sun Dec 09, 2012 2:17 pm

Pins 2 and 4 are ground on mine, connected by the same trace.

User avatar
ShowMaster
Posts: 4327
Joined: Thu Dec 29, 2011 3:44 am
Country: -
Location: Los Angeles, CA USA

Re: pin assignment module bay

Post by ShowMaster » Sun Dec 09, 2012 3:11 pm

pmullen503 wrote:Pins 2 and 4 are ground on mine, connected by the same trace.
c
ImageUploadedByTapatalk1355065364.857218.jpg
You're correct for the Turnigy and FlySky series of radios.
JR needs +6V for their modules like 72 or 50 or 35 MHz.
FYI
The Frsky DJT module normally leaves those two pins unused/open so it can be used in any JR pinout tx.
ImageUploadedByTapatalk1355065867.944958.jpg


Post Reply

Return to “RF MODULES”