Fr SKY DJH

Choosing an RF Module? What modules work? What is compatible with the 9x?
Post Reply
CAOS
Posts: 3
Joined: Tue Oct 16, 2012 6:52 am
Country: -

Fr SKY DJH

Post by CAOS » Fri Nov 30, 2012 5:44 pm

Hello

I bought last week at HobbyKing following module for my Turnigy9x "FrSky DF 2.4Ghz Combo Pack for JR w/ Module & RX"
Link: -> http://www.hobbyking.com/hobbyking/stor ... le_RX.html

Image

To bind the receiver and the controller go super

It occurs 2 problems

First The switch "THR CUT" and "AIL" do not work
Second The telemetry data is not displayed

What am I doing wrong? :?: :oops:
Last edited by CAOS on Fri Nov 30, 2012 7:46 pm, edited 1 time in total.


User avatar
Kilrah
Posts: 10796
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Fr SKY DJH

Post by Kilrah » Fri Nov 30, 2012 5:52 pm

You're using the frsky version of the firmware but haven't done the telemetry mod. Use the normal version.

Sent via mobile

CAOS
Posts: 3
Joined: Tue Oct 16, 2012 6:52 am
Country: -

Re: Fr SKY DJH

Post by CAOS » Fri Nov 30, 2012 6:05 pm

I'm using firmware version FrSky Open9x for '9 X radios with Fr-Sky telemetry modification

The display is always "NO DATA"

User avatar
Kilrah
Posts: 10796
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Fr SKY DJH

Post by Kilrah » Fri Nov 30, 2012 6:49 pm

Yes, if you want telemetry you have to do these modifications:
http://openrcforums.com/wiki/index.php/ ... _telemetry

If you don't do them, use the normal firmware (NOT FrSky).

CAOS
Posts: 3
Joined: Tue Oct 16, 2012 6:52 am
Country: -

Re: Fr SKY DJH

Post by CAOS » Fri Nov 30, 2012 7:44 pm

Thank you for your reply

The modification with the 2 resistors is yes OK
But where do I have FrSky Rx and Tx FrSky solder.

The FR-SKY-DJH's all a cartridge


Image

I still installed inside this board and a soldering is not possible otherwise get nothing around contact pins

Image
Last edited by CAOS on Sat Dec 01, 2012 9:56 am, edited 1 time in total.


User avatar
Kilrah
Posts: 10796
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Fr SKY DJH

Post by Kilrah » Fri Nov 30, 2012 8:04 pm

CPU -> level converter (frsky upgrade lite as shown in the guide, or equivalent) -> RXD/TXD pins on the back of the module.


Post Reply

Return to “RF MODULES”