FrSky XJT module. Is it dead?

Choosing an RF Module? What modules work? What is compatible with the 9x?
Post Reply
oldgazer
Posts: 4
Joined: Thu Dec 01, 2016 11:27 pm
Country: United States
Location: Richmond VA

FrSky XJT module. Is it dead?

Post by oldgazer »

I've had an XJT module in a TH9x with an AR9x board for a long time. Recently the XJT stopped working. When I power up the radio the red and green LEDs on the module are both on steady.

I cannot put the module into bind mode.

I have tested this module in a QX7 and a Jumper T12 with the same results.

I have also flashed the latest firmware. The flash was successful, but the module refuses to function.

Is there any hope, or do I need to replace it?

TIA..

User avatar
MikeB
9x Developer
Posts: 17979
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: FrSky XJT module. Is it dead?

Post by MikeB »

Have you tried putting it into bind mode by holding the button pressed while powering on?

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
Post Reply

Return to “RF MODULES”