Witch tx module for 9x r pro and 9x8cv2 Rx

Choosing an RF Module? What modules work? What is compatible with the 9x?
Post Reply
gborras
Posts: 2
Joined: Sun Nov 05, 2017 9:30 am
Country: -

Witch tx module for 9x r pro and 9x8cv2 Rx

Post by gborras »

Hi, new to this forum, no english native, so... sorry in advance...
I'm looking forward to buy a turnigy 9x pro radio, and give my lovely old 9x to my son.
The question is very simple.
Wich tx moduke should i take to be able to use my new 9x pro with the old 9x cv2 receivers?
Sorry if the answer is already in the forum, but I'm quite lost with those afhds dsss dsmx and so protocols.... and the search is unsuccessful.

Thks

User avatar
bob195558
Posts: 2376
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Witch tx module for 9x r pro and 9x8cv2 Rx

Post by bob195558 »

Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
User avatar
bob195558
Posts: 2376
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Witch tx module for 9x r pro and 9x8cv2 Rx

Post by bob195558 »

Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
gborras
Posts: 2
Joined: Sun Nov 05, 2017 9:30 am
Country: -

Re: Witch tx module for 9x r pro and 9x8cv2 Rx

Post by gborras »

Thank you bob.

G.
User avatar
SR71
Posts: 109
Joined: Tue Feb 28, 2012 10:21 pm
Country: Italy
Location: Rome

Re: Witch tx module for 9x r pro and 9x8cv2 Rx

Post by SR71 »

I have just that module in my Taranis 9D with OpenTX.

2.4G CC2500 NRF24L01 A7105 CTRF6936 4-IN-1 Multi-protocol STM32 TX Module With Antenna

selecting protocol 1 (the only marked as "FLYSKY") I am not able to bind the receiver 9x8Cv2.

In OpenTX I selected

ExtRF Module : PPM
Channel Range: CH1-8
PPM Frame 25.0 ms 300us -


Any suggestion ?


TIA

User avatar
MikeB
9x Developer
Posts: 17979
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Witch tx module for 9x r pro and 9x8cv2 Rx

Post by MikeB »

One "problem" with that module is we never know what firmware it ships with. The firmware supports (currently) 36 different major protocols, so not all of them are available on the rotary switch when using PPM.
To guarantee the ones you want are available, you need to build and flash the firmware yourself.
Details are here: https://www.rcgroups.com/forums/showthr ... -TX-Module.

I'm not sure exactly where openTx is at regarding this module, there is support for using the Multi serial protocol, but that may only be available in 2.2.1 pre-releases. If you have the Multi serial protocol working then you may select any of the protocols.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Post Reply

Return to “RF MODULES”