Template for Tarot Hexacopter

If you have a model config you would like to share. Post it here!
Post Reply
Posts: 1
Joined: Mon Aug 08, 2016 6:00 am
Country: -

Template for Tarot Hexacopter

Post by vakaobr » Mon Aug 08, 2016 6:02 am

Hello there,

I just bought a Tarot 680Pro, using a ZYX-M controller and a Taranis X9D Plus, now I'm feeling totally lost about how to configure the radio to deal with the hexacopter.

I'm looking for a template for where I can start (a generic hexacopter template maybe?) Or, if somebody has a similar setup, a "final" template will be great :lol:

User avatar
Posts: 2252
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont

Re: Template for Tarot Hexacopter

Post by bob195558 » Thu Aug 18, 2016 12:03 pm

You would set it up the same as a Quadcopter, much like the same as a plane would be, using your X8R receiver.

The ZYX-M controller looks a lot like the NAZA-M Lite flight controller.

Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).

Posts: 1
Joined: Sun May 12, 2019 5:12 am
Country: -

Re: Template for Tarot Hexacopter

Post by Brianpar1 » Sun May 12, 2019 5:17 am

So, after setting up some Naza and a2..it was pretty straight forward..the big thing I noticed once I mapped the channels the elevator was reversed, stopping the motors from starting..for me..com 4, connect..program, flash..motor test, calibrate..set switches..this is so like the Naza..hope this helps anyone,,

Post Reply

Return to “Template Library”