Logical Switches

If you have a model config you would like to share. Post it here!
Post Reply
davek
Posts: 5
Joined: Sun Mar 27, 2016 11:42 am
Country: -

Logical Switches

Post by davek » Mon Mar 28, 2016 5:29 pm

I have opentx ver. 2.1.7 on my taranis.
I want one of my gliders to sound an audible warning or voice when my glider goes below a certain altitude. I assume this is done with logical switches and special functions.
Unfortunately my illogical brain is having difficulty in working out how its done.
I would be grateful if someone could guide me to how to proceed.

Davek

User avatar
bob195558
Posts: 1901
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Logical Switches

Post by bob195558 » Fri Apr 01, 2016 11:49 am

Hi davek,
I have not used OpenTx for a long time now, but here is where you
can find some OpenTx info: (http://open-txu.org/)
and (https://www.youtube.com/playlist?list=P ... 0qlU0q3vJR)
and (http://www.alofthobbies.com/files/Taran ... _Guide.pdf).

Bob B.
ErSky9x on Taranis, Sky9x, 9Xtreme, Er9x on 9x with Smartieparts Programmer with TelemetrEZ Board
3D Printing: (http://openrcforums.com/forum/viewforum.php?f=85)

User avatar
Myckey
Posts: 20
Joined: Sun Jan 27, 2013 11:17 am
Country: -

Re: Logical Switches

Post by Myckey » Tue Apr 05, 2016 7:15 pm

Logical switch page, switch L whatever, first box a<x (less than) second box Alt (you need to have discovered the sensor first), next box whatever height you want the switch "on" at.

Next

Special functions page, switch L whatever you used, then play track, then what track you want to play from the sd card sounds folder, then either no repeat or enter seconds to repeat every X seconds.

That will play when you get below X height, to do the opposite switch to a>x.

davek
Posts: 5
Joined: Sun Mar 27, 2016 11:42 am
Country: -

Re: Logical Switches

Post by davek » Wed Apr 06, 2016 8:52 am

Thanks for your help.

Post Reply

Return to “Template Library”