Servo speed/scroll/integral mix

If you have a model config you would like to share. Post it here!
Post Reply
Iksbob
Posts: 121
Joined: Wed Dec 28, 2011 1:06 pm
Country: -

Servo speed/scroll/integral mix

Post by Iksbob » Fri May 03, 2013 3:43 am

MikeB came up with (or at least posted) this a while back, and per Rob's request here is a simple template.

The mix lets the source control the speed of servo movement, rather than its absolute position.
When the stick (pot, or whatever) is at center, the servo holds its present position, whatever that may be. When the stick is moved off center, the servo begins moving progressively in that direction. How quickly it moves is proportional to the stick position.

Notes on function and usage are on the mixes.
Attachments
CamControl.eepe
(2.22 KiB) Downloaded 180 times

derFrickler
Posts: 46
Joined: Mon Jan 09, 2012 9:54 am
Country: -

Re: Servo speed/scroll/integral mix

Post by derFrickler » Tue Aug 06, 2013 12:12 pm

Hey, that is exactly what i am trying to do! Perfect.

I opened your Template in companion9x for openTX but it does not seems to work.
Whixch stick shall control the output on ch01?
Maybe there is something goiing wrong when importing the template...
opentx.png

Helle
Posts: 572
Joined: Sat Jul 21, 2012 7:08 am
Country: -

Re: Servo speed/scroll/integral mix

Post by Helle » Tue Aug 06, 2013 2:36 pm

Hy Frickler,

here the Camcontrol for Taranis adapted and tested.

for 1 and for 2 Chanels X/Y

Speedsetting is with curve 9 and/or with weight from 3% to 2% or 1 %

Helle
Attachments
CamControl_2 Kanal.eepe
Cam Control Dynamische Servobewegung für Taranis 2 Kanal
(76.03 KiB) Downloaded 137 times
CamControl.eepe
Cam Control Dynamische Servobewegung für Taranis
(76.03 KiB) Downloaded 130 times

daver18qc
Posts: 1
Joined: Thu Jul 06, 2017 10:03 pm
Country: -

Re: Servo speed/scroll/integral mix

Post by daver18qc » Thu Jul 06, 2017 10:06 pm

Holy thread resurection, Batman !
But...
I had to register to thank you, with thes mixes/logical switches i can now make my 3d printed excavator behave like the real thing instead of having the servos return to center when i release the sticks.
I searched so much for a way to do this and having found this page, resolved all my problems !!

THANK YOU SO MUCH !!

Post Reply

Return to “Template Library”