Page 2 of 2

Re: Stock Firmware - For Flashing

Posted: Fri Feb 15, 2013 4:11 am
by gohsthb
Just save them directly to file, and it will work fine.
-Gohst

Sent from my LG-P999 using Tapatalk 2

Re: Stock Firmware - For Flashing

Posted: Fri Feb 15, 2013 5:59 am
by kaos
Just did it. there is a hex file and a eeprom file now. I guess it is backed up. thx.

Re: Stock Firmware - For Flashing

Posted: Fri Feb 15, 2013 9:32 am
by gohsthb
One way to know for sure. Flash something else to the radio. Then flash the original back. See if it works.

Sent from my LG-P999 using Tapatalk 2

Re: Stock Firmware - For Flashing

Posted: Thu Jul 24, 2014 12:46 am
by rainless
Hi! Can someone post the stock Flysky (not the Turnigy) firmware? Someone I'm selling one of my TXes to is requesting it. Thanks.

Re: Stock Firmware - For Flashing

Posted: Thu Jul 24, 2014 5:06 pm
by MikeB
I thought they are the same thing!

Mike.

Re: Stock Firmware - For Flashing

Posted: Thu Jul 24, 2014 5:17 pm
by jhsa
Mike, I have a flysky radio that hasn't been modded yet. Can I save the fw with eepe? and the eeprom?
If so, I can try and post it in the forum.. will have to solder the wires of course, so it could take a few hours.. :)

João

Re: Stock Firmware - For Flashing

Posted: Thu Jul 24, 2014 8:54 pm
by Kilrah
They are the same, only thing changing is the splash screen.

Sent via mobile

Re: Stock Firmware - For Flashing

Posted: Sat Dec 13, 2014 2:49 am
by 545274979q
i am poor in englishi,i want to get at91sam3s8-9xr.zip

Re: Stock Firmware - For Flashing

Posted: Sat Dec 13, 2014 6:32 pm
by MikeB
Try here: viewtopic.php?f=123&t=5581&p=83566&hili ... 3s8#p83548.

You only need this if the bootloader is not working (Hold both horizontal trims to the centre, then switch on).

Mike.

Re: Stock Firmware - For Flashing

Posted: Sun Feb 21, 2016 4:42 pm
by dekromme
hi guys
I looking for firmware version 1.05 Turnigy Tgy i10 but can't find I have updated my transmitter to version 1.07 and also my receivers but only 2 channels on my receiver is working so I want back to version 1.05 how now's a link to find this firmware.

Re: Stock Firmware - For Flashing

Posted: Sun Jul 24, 2016 6:16 pm
by UrsaFrey
Hi..i am a new user here. I have few queries.,.,Has any corrections to the original FW been made like spelling?There are some that see no reason to be able to upgrade their FW and loading a cleaned up version could be just the thing to lure them to try reprogramming without going to er9x or other FW.
With some of the recent low cost programming options it could catch on.

assembly pcb

Re: Stock Firmware - For Flashing

Posted: Sun Jul 24, 2016 8:23 pm
by Kilrah
No, nothing was ever fixed on the original 9x firmware, neither spelling mistakes nor the more important bugs like reversed trainer operation.

Re: Stock Firmware - For Flashing

Posted: Tue Oct 16, 2018 10:50 am
by HTeixeira
Anyone has the original firmware for V2 versions?

Re: Stock Firmware - For Flashing

Posted: Tue Oct 16, 2018 11:33 am
by MikeB
There is a file on the first post of this thread.

I also have:
TGY9xAFhds2a.zip
(48.98 KiB) Downloaded 202 times
that I think is the "latest" firmware that supports your module. You need to flash both the firmware and the EEPROM.

Mike

Re: Stock Firmware - For Flashing

Posted: Tue Oct 16, 2018 12:09 pm
by HTeixeira
Thanks for the help.

Re: Stock Firmware - For Flashing

Posted: Wed Oct 17, 2018 9:41 pm
by HTeixeira
The EEPROM says that can be corrupted. I cannot upload it.

Re: Stock Firmware - For Flashing

Posted: Wed Oct 17, 2018 9:45 pm
by Kilrah
You must flash it directly, not try to open it as a document.