Original 9X needing to mix ailerons and rudder

Programming your 9x using the stock firmware that comes with the radio. (Note. This is for the th9x, not the X9R)
Post Reply
IRISHBUG
Posts: 19
Joined: Sun Apr 14, 2013 8:24 pm
Country: -

Original 9X needing to mix ailerons and rudder

Post by IRISHBUG »

I'm sorry if this is the wrong place to post this but I couldn't find anywhere else to. I have the original firmware Turnigy 9X transmitter, and I'd like to know if someone can tell me how I setup the rudder to move when I use the ailerons. I am a newbie to this radio, but I have searched and searched the net but can not find the information anywhere. Could someone please walk me through that type of setup?

Thank you :?

User avatar
rperkins
Posts: 1422
Joined: Sun Jan 08, 2012 12:51 pm
Country: -

Re: Original 9X needing to mix ailerons and rudder

Post by rperkins »

Hello and welcome to the forum.

I dont know the answer to your question but you posted it in the right place.
Do you have the user guide for the original firmware ? I do think I've seen that floating around.

Watch out hanging around here too long, You'll end up ditching that original firmware and using one of the open source versions talked about here :)
mpjf01
Posts: 367
Joined: Thu Jul 26, 2012 3:07 am
Country: -
Location: Adelaide, Australia

Re: Original 9X needing to mix ailerons and rudder

Post by mpjf01 »

rperkins wrote: Do you have the user guide for the original firmware ? I do think I've seen that floating around.
There's versions on the HK website, product description for the 9x, files Tab.

Post Reply

Return to “stock firmware (fly sky th9x)”