Hi Community,
I really hope one of the programming geniuses out there can help me. I am trying to program my optical kill swith onto channel 6 (using the gear switch).
I watched some of the videos and have managed to get the switch to function. I even get the on light on the optic kill switch to come on but I get no spark at the engine. I have confirmed that the optic kill switch is functioning by testing it on my brothers plane. He uses a different radio.
I get spark if I connect my ignition battery directly. I cannot get spark through the optil kill switch even with the ignition light on.
I have checked that the switch works
I can get the red light on the iginition switch to light up.
I get no spark
I have checked that all my connections are connected correctly
I have a turningy radio with ER 9X software.
Current mix settings are
Channel 6
Source Full
Weight 125
Offset 0
F1Modetrim OFF
Trim OFF
Curves ----
Switch Gear
Warning OFF
Multipx Add
Delay Down 0
Delay Up 0
Slow Down 0
Slow Up 0
Please help
You can email me [email protected]
Thanks
Help To program optical kill swith
Re: Help To program optical kill swith
What does the kill switch need to see? What percentage? Try reducing the weight to 100% as setting it over 100 doesn't do anything. If you want more throw you would have to enable extended limits and then change the limits for that channel to 125%.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Help To program optical kill swith
What radio does your brother use, and how is it set?
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Help To program optical kill swith
Problem Solved.
I took my multimeter and followed the voltage flow through the system. Found an ill fitting plug. I cannot believe that 2 weeks of frustration has stemmed from an ill fitting plug. Thanks to those that responded. I appreciate it.
I took my multimeter and followed the voltage flow through the system. Found an ill fitting plug. I cannot believe that 2 weeks of frustration has stemmed from an ill fitting plug. Thanks to those that responded. I appreciate it.