Help setting up flysky module on 9XR pro
Posted: Thu Nov 22, 2018 5:56 am
Hey guys -
I need some help getting a fly sky AFHDS 2A module working on the 9XR PRO using the latest version of ersky9x.
The module is the FS-RM003 and I am using the x6b receiver. When I bind the receiver to my flysky fs-i6x i get full control and telemetry for RSSI and Voltage sent to the transmitter but I can't get the RSSI and voltage telemetry working on the 9XR pro.
I was able to get the module communicating with the receiver setting the protocol to PPM 8Ch default settings but polarity set to inverted. Tried defaults for telemetry but not seeing any RSSI on the radio. My assumption is that RSSI showing up on the radio should be the most basic thing to get working if i was getting any feedback from the module.
I can bind the receiver to the module and have full control of the drone so I know the RF link is good. Can anyone share what settings I need to use to get telemetry back from the fly sky TX module?
Thanks!
--Chris
I need some help getting a fly sky AFHDS 2A module working on the 9XR PRO using the latest version of ersky9x.
The module is the FS-RM003 and I am using the x6b receiver. When I bind the receiver to my flysky fs-i6x i get full control and telemetry for RSSI and Voltage sent to the transmitter but I can't get the RSSI and voltage telemetry working on the 9XR pro.
I was able to get the module communicating with the receiver setting the protocol to PPM 8Ch default settings but polarity set to inverted. Tried defaults for telemetry but not seeing any RSSI on the radio. My assumption is that RSSI showing up on the radio should be the most basic thing to get working if i was getting any feedback from the module.
I can bind the receiver to the module and have full control of the drone so I know the RF link is good. Can anyone share what settings I need to use to get telemetry back from the fly sky TX module?
Thanks!
--Chris