Thank You OPENRC

Have something to say about 9xForums? Whether it be good or bad, about our products, site or service, tell us about it here.
Post Reply
User avatar
cutsrock
Posts: 1
Joined: Tue Oct 02, 2012 1:01 am
Country: -

Thank You OPENRC

Post by cutsrock » Wed Aug 13, 2014 9:40 pm

Joined this forum to get a little information. Since joining I have; updated to opentx, and a Taranis. Have found answers to all of my questions, without having to post a question.

Thanks for all the help. :D


NapaWinecountry
Posts: 1
Joined: Mon Oct 20, 2014 3:32 am
Country: -

Re: Thank You OPENRC

Post by NapaWinecountry » Mon Oct 20, 2014 4:41 am

I know very little about forms. I own two turnigy 9x, and one 9xr. I still have one 9x and one 9xr working. I need to know how to set up a 9xr with a turnigy 9x module installed. I WILL THANK YOU ALL IN ADVANCE.

User avatar
jhsa
Posts: 19387
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Thank You OPENRC

Post by jhsa » Mon Oct 20, 2014 12:24 pm

Hi welcome to the openRCforums..
What exactly do you need to know? Did you already install the turnigy 9x module in the 9XR? Does the module have it's own antenna? I know that the turnigy version of the 9x radio shipped with the antenna placed on top of the radio and the antenna cable was soldered to the module in the back, making it not possible to remove the module without de-soldering the antenna cable. The flysky 9x module came already with the antenna placed on the module itself..
If you give us a bit more information about your setup it will be easier to help you ;) :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW


Post Reply

Return to “Feedback”