Hello again, well I have a problem with companion9x, when I want do something for example read eeprom from tx or write flash memory or so on appears a windows with the error:
=================================================================================
Started AVRDUDE
C:/Program Files/companion9x/avrdude.exe -c usbasp -p m64 -P usb -U eeprom:r:C:/Users/pepe/AppData/Local/Temp/temp.hex:i
=================================================================================
avrdude.exe: error: could not find USB device "USBasp" with vid=0x16c0 pid=0x5dc
avrdude.exe done. Thank you.
=================================================================================
AVRDUDE done - exit code 1
=================================================================================
Now the drivers are from samba 2.12;I changed several version but I cannot solve my problem.
Please can anybody help me ? Thank for your attention.
Edit to tell I have one esky9x board rev 3 in my radio.
Beste regards from Málaga
I cannot read eeprom from tx
Re: I cannot read eeprom from tx
On the report above companion is using avrdude not samba. That might mean that you don't have the skyboard selected in companion. Please go to preferences and select the correct board.
João
Sent from my GT-I9195 using Tapatalk
João
Sent from my GT-I9195 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: I cannot read eeprom from tx
Hello jhsa you are right, I have two radios one with the stock board and the other with the skyboard, Yesterday I flashed the stock board one and there is the problem. Thank you very much, all is well now.
Best regard from Málaga
Best regard from Málaga
Re: I cannot read eeprom from tx
Great that is working.
But I think you can create different profiles for both your radios and save them. Then you just load the right profile when necessary.
João
Sent from my GT-I9195 using Tapatalk
But I think you can create different profiles for both your radios and save them. Then you just load the right profile when necessary.
João
Sent from my GT-I9195 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW