Page 1 of 1
Sounds do not play in model editor
Posted: Sat Nov 25, 2017 5:42 am
by LightningStalker
Hello. When I simulate the Taranis, the sounds play just fine, but they do not play under Special Functions when editing the model.
Re: Sounds do not play in model editor
Posted: Wed Oct 24, 2018 2:32 pm
by CRBF86
I'm using the companion not connected to radio to play with some settings.
Companion does not see the sounds
But I see that no posts on this forum since 2017? so this must be dead now.
Re: Sounds do not play in model editor
Posted: Wed Oct 24, 2018 3:24 pm
by rdeanchurch
The most common problem is not having the path to the clone of the SD card that contains the sounds set correctly. Of course this implies you have an exact clone of the transmitters SD card on your PC.
Re: Sounds do not play in model editor
Posted: Wed Oct 24, 2018 10:19 pm
by CRBF86
Thanks for the help! I'll enter the info on that line. I do have the SD card contents copied in a folder.
I copied that file into a blank SD card and inserted that into the port, but had no luck.
Update;
That was easy!
working now, thanks again for your help
Chris