Please forgive my complete idiot mess I'm in
Bought a 9xr pro
It's been modified with firmware and has two modules and two receivers. Both 8ch frsky
One has telemetry can't remember the other right now
Question is. I'm lost
No manual no where to start
Never used a tx other than what has come with my uav or a simple 6ch this and that
Turn on it says
Turn switches to regular position
Or push button to continue
I plug into apm get nothing in mission planner.
Try NAza nothing shows up
I flipped every switch turned all the knobs
I'm clueless
Any help to get me going?
I've bound tx and rx but like I said
I could be doing this all wrong
New to 9xr pro
Re: New to 9xr pro
First of all you have to find out what firmware you have installed on your radio. Then people that use the same firmware might try to help if they know how to.
So, first question, what does the radio say on the screen when you turn it on? Ersky9x or openTX?
João
So, first question, what does the radio say on the screen when you turn it on? Ersky9x or openTX?
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: New to 9xr pro
Er sky 9x upon turning on TX
with fr sky v8fr II RX and fr sky module with telemetry
THANK YOU!
with fr sky v8fr II RX and fr sky module with telemetry
THANK YOU!