Page 1 of 1

rCos Project

Posted: Thu Jan 17, 2013 6:03 pm
by KanishkaRC
Hi ,

I found this wonderful project while searching the internet sometimes back and thought of posting it here as it carries a great set of libraries and other stuff for the RC use.

Description from the site:
rCos (RemoteControl-OperatingSystem) is a software- and toolset for building modern computer remote controls for rc-models. In the core of the system there is an STM32 Microcontroller with C Open-Source firmware and multiple hardware expansion interfaces (SPI, Serial, I2C, ...).

And if you are fan of you will find many DIY transmitters and RC projects.

Another good project from Th9x authors. )
(Alternative Software for Corona 2.4GHz DSSS System

Hope this is of interest.

Re: rCos Project

Posted: Thu Jan 17, 2013 7:42 pm
by bertrand35
It's not finished (oradiocontrol) ;)


Re: rCos Project

Posted: Fri Jan 18, 2013 3:01 am
by KanishkaRC
AFAIK with the current settings it can be used to fly something ... gungssyst/

And as a side note if you are interested :
RCOS hardware for FM6014 ... ie-fm6014/

7 "monitor on the remote control box ... enderpult/

Re: rCos Project

Posted: Mon Oct 14, 2013 12:07 am
by tedbmoss
It is pretty dead.