rCos Project

Not sure what firmware to use? Making a new firmware? Ask in here!
Post Reply
KanishkaRC
Posts: 35
Joined: Sun Sep 02, 2012 8:57 pm
Country: -

rCos Project

Post by KanishkaRC » Thu Jan 17, 2013 6:03 pm

Hi ,

I found this wonderful project while searching the internet sometimes back and thought of posting it here as it carries a great set of libraries and other stuff for the RC use.

Description from the site:
rCos (RemoteControl-OperatingSystem) is a software- and toolset for building modern computer remote controls for rc-models. In the core of the system there is an STM32 Microcontroller with C Open-Source firmware and multiple hardware expansion interfaces (SPI, Serial, I2C, ...).

http://www.rcos.eu/

And if you are fan of rcline.de http://www.rclineforum.de/forum/index.php you will find many DIY transmitters and RC projects.

Another good project from Th9x authors. )
(Alternative Software for Corona 2.4GHz DSSS System
https://code.google.com/p/oradiocontrol/

Hope this is of interest.


bertrand35
9x Developer
Posts: 2764
Joined: Fri Dec 30, 2011 11:11 pm
Country: -

Re: rCos Project

Post by bertrand35 » Thu Jan 17, 2013 7:42 pm

It's not finished (oradiocontrol) ;)

Bertrand.

KanishkaRC
Posts: 35
Joined: Sun Sep 02, 2012 8:57 pm
Country: -

Re: rCos Project

Post by KanishkaRC » Fri Jan 18, 2013 3:01 am

AFAIK with the current settings it can be used to fly something
http://www.rclineforum.de/forum/board49 ... gungssyst/

And as a side note if you are interested :
RCOS hardware for FM6014
http://www.rclineforum.de/forum/board49 ... ie-fm6014/

7 "monitor on the remote control box
http://www.rclineforum.de/forum/board49 ... enderpult/

tedbmoss
Posts: 117
Joined: Sun Jul 15, 2012 10:42 pm
Country: -
Location: Phoenix, AZ

Re: rCos Project

Post by tedbmoss » Mon Oct 14, 2013 12:07 am

It is pretty dead.


Post Reply

Return to “other”