What Firmware for 9xr w/multiprotocol

Not sure what firmware to use? Making a new firmware? Ask in here!
Post Reply
jtrops
Posts: 3
Joined: Fri Apr 28, 2017 11:16 pm
Country: -

What Firmware for 9xr w/multiprotocol

Post by jtrops »

I have a 9xr with the Irangex IRX-4 multiprotocol module. I'm trying to figure out which firmware to install that will allow selection of the protocols on the module.

I looked at OpenTX, but in the OTC Companion app it doesn't list Multimodule as an option for the 9XR/m128. It is there for a few other radios including the 9x w/AR9x chip.

So, it looks like ER9X would have the multimodule support, but which version do I use. I found a bunch of .hex downloads in the "er9x testing" thread. Once I have a .hex file that will do the trick, how do I actually flash it? I installed eePe, but it doesn't look like there is any way to flash a .hex file to the radio through the software.

I'm sure I'm missing something. Thank you in advance for any help in navigating this.

Jerry

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: What Firmware for 9xr w/multiprotocol

Post by jhsa »

Go to www.er9x.com, download the firmware "er9x-128.hex".
Use eepe to flash it to the radio. You will need an ISP programmer, like for example an "UsbAsp".
Don't forget to configure eepe to flash the m128 chip, and select the programmer you have from the list..

João



Sent from my thor using Tapatalk

My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
jtrops
Posts: 3
Joined: Fri Apr 28, 2017 11:16 pm
Country: -

Re: What Firmware for 9xr w/multiprotocol

Post by jtrops »

Thank you for pointing me in the right direction.
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: What Firmware for 9xr w/multiprotocol

Post by jhsa »

Please let us know if you need more help..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
jtrops
Posts: 3
Joined: Fri Apr 28, 2017 11:16 pm
Country: -

Re: What Firmware for 9xr w/multiprotocol

Post by jtrops »

I'm still waiting for the programmer, but once I have it installed I'm sure that getting my models programmed in will be the next big hurdle.

Post Reply

Return to “other”