Radioking - which Radio Type for Firmware?

Not sure what firmware to use? Making a new firmware? Ask in here!
Post Reply
spcboarder
Posts: 7
Joined: Wed Jun 16, 2021 4:12 pm
Country: Austria

Radioking - which Radio Type for Firmware?

Post by spcboarder » Thu Jun 17, 2021 12:49 pm

Hello,
I have a Radioking TX18S. I have problems with updating the firmware/copying safed models back to the radio.

In all the Firmware updates Radioking is not mentioned as supported Radio. It looks like a Radiomaster TX16s, but has one button less (page back). In another thread here (viewtopic.php?f=98&t=12963&p=151765&hil ... ng#p151765) I read that it is internally the same as an Jumper T18.

Attached is a screenshot with the choices of Radios OpenTx is giving me. Which radio should I choose?

Thanks,
spcboarder
Attachments
Radio choices.png
(106.17 KiB) Not downloaded yet


Suncoaster
Posts: 310
Joined: Thu Dec 29, 2011 10:18 am
Country: Australia
Location: Cooloola Cove, Australia

Re: Radioking - which Radio Type for Firmware?

Post by Suncoaster » Fri Jun 18, 2021 5:30 am

It is a Jumper T18 clone so just select that and all will be ok. I have a Radioking TX18s and it worked for me, when I upgraded to Open-Tx 2.3.11. :-) Enjoy the radio.

spcboarder
Posts: 7
Joined: Wed Jun 16, 2021 4:12 pm
Country: Austria

Re: Radioking - which Radio Type for Firmware?

Post by spcboarder » Fri Jun 18, 2021 1:54 pm

Thanks suncoaster!

I selected the Jumper T18 and I could bring back my safed models :)
BR, spcboarder

PS: so far this radio is giving me some headaches. I hope I will solve thes issues. I hope you guys from the forum can help me out on my further challenges as well!
Last edited by spcboarder on Fri Jun 18, 2021 9:06 pm, edited 1 time in total.

spcboarder
Posts: 7
Joined: Wed Jun 16, 2021 4:12 pm
Country: Austria

Re: Radioking - which Radio Type for Firmware?

Post by spcboarder » Fri Jun 18, 2021 9:05 pm

Unfortunately the Firmware for a Jumper TX18 does not work. There I get a
"WrongPCBdetected Error".

I downloaded Firmware: Jumper T18-6-12-2.3.8V0027.bin

However, I just updated the Jumper software to 2.3.12 and now my Radio seems to work and I even get the DSM X11ms Protocol, which (I hope) will be the key for binding to Spektrum (DSMX) receivers.

Br, spcboarder
Attachments
WhatsApp Image 2021-06-18 at 23.03.44.jpeg
(51.83 KiB) Not downloaded yet


Post Reply

Return to “other”