Antenna cap for your Turnigy 9X
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Antenna cap for your Turnigy 9X
This 1/2 in. cap looks good and is gray and has a slightly rounded top and is a soft plastic and fits snugly.
2 for $.77. The white ones I found were harder material and kind of stark so I think this is a good compromise for me.
http://www.homedepot.com/h_d1/N-5yc1v/R ... reId=10051
SM
2 for $.77. The white ones I found were harder material and kind of stark so I think this is a good compromise for me.
http://www.homedepot.com/h_d1/N-5yc1v/R ... reId=10051
SM
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: Antenna cap for your Turnigy 9X
Pictures. Caps can be cut shorter for a lower profile. I have not.
SM
SM
-
- Posts: 121
- Joined: Mon Jan 02, 2012 9:56 am
- Country: -
Re: Antenna cap for your Turnigy 9X
looks good, even better than the original to me
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: Antenna cap for your Turnigy 9X
Thank you, it matches the black and silver on the t9x OK I think and was an easy fix.wallaguest1 wrote:looks good, even better than the original to me
2 for $.77 is not bad. For those in the states like me, any Home Depot should have them in the special screw drawer in the screw section. For others maybe something could be worked out?
Price is right it's just postage and VAT I guess after that. All new to me in that area.
Being a screw or bolt cover I'm sure it's used in many countries under a different name for what it does?
SM
Re: Antenna cap for your Turnigy 9X
SM: here is mine with that cap. Looks good. just put it on today. Thx for the tip.
and Ghosthb, that is your Flysky module on the back now.
and Ghosthb, that is your Flysky module on the back now.
Re: Antenna cap for your Turnigy 9X
Nope not my module. I have that one away. He he he looks good.
-gohst
Sent from my LG-P999 using Tapatalk 2
-gohst
Sent from my LG-P999 using Tapatalk 2
Re: Antenna cap for your Turnigy 9X
Gee, no feeling for ex at all. cold blooded.
- cre8tiveleo
- Posts: 1434
- Joined: Tue Dec 27, 2011 6:13 pm
- Country: -
- Location: Ontario,(GTA North)
- Contact:
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Antenna cap for your Turnigy 9X
Check this cap.
http://www.xtremepowersystems.net/prodd ... NT2&cat=12
Certainly useful for those doing the DIY hack modules.
Sent from my Nexus 7 using Tapatalk 2
http://www.xtremepowersystems.net/prodd ... NT2&cat=12
Certainly useful for those doing the DIY hack modules.
Sent from my Nexus 7 using Tapatalk 2
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
- MostlyHarmless
- Posts: 19
- Joined: Wed Aug 22, 2012 3:26 pm
- Country: -
- Location: Willow Grove, Pennsylvania, USA
Re: Antenna cap for your Turnigy 9X
They came as protective caps on the PL-259 connectors of an antenna cable once. Never knew what I could use them for until today when I moved the antenna to the original V2 module.
Curiously enough, the only thing that went through the mind of the RC helicopter as it fell, was, "OH NO, NOT AGAIN."