Push buttons / Encoder

Where to find parts? Refactoring your entire transmitter, new cases? Sticks etc..
Rad
Posts: 452
Joined: Wed Apr 20, 2016 3:43 pm
Country: Austria
Contact:

Re: Push buttons / Encoder

Post by Rad »

Hi, the soundcard has two sound and functions inputs, divided in two channels. One input works in a channel with a 3 pos switch, but it is fine, this has already been solved.

The other one works with another channel, and it is controlled with the 12 position switch + a triggering button. So the desired position function is pre selected, and then triggered.

The way MikeB solved it in this thread worked too back in the day.

I will try to test your way today, and I will update it if it works or not :)
https://radindustries.wordpress.com/

Rad
Posts: 452
Joined: Wed Apr 20, 2016 3:43 pm
Country: Austria
Contact:

Re: Push buttons / Encoder

Post by Rad »

jhsa wrote: Thu Sep 19, 2019 8:57 am So, the 12 position switch changes some mixes in channel 7 if I umderstand??
What values does it expect to see?

Sorry, I have to understand what that module does to be able to help you. Or at least find the old post of about 2 years ago.

João


EDIT: Yes, you will have to add misses to channel 7 for something to happen.
Try HALF, and yes, use the L1, L2, etc switches. Use replace mixes..
The weight values depend on what the module needs, which I don't know.
Is the trigger switch on the same channel?
If so, please try to add this to the logical switches.
Supposing that TRN is the trigger switch.

L1 AND 6P0 ELE and TRN

Do the same to all logical switches.
Perhaps this is what ot is expected..
It is done.

THANK YOU VERY MUCH

Not only it works, but I also understood and learn about the logic switches, and that is something that always intrigued me. Now I will be able to program even more complex models. thank you very much!

I keep mentioning you, the open rc guys, and specially you, Joao and MikeB in the rc tank forums for your unfatigable help. I will write an article in my blog too.

www.radindustries.wordpress.com

Again, thank you very much!
https://radindustries.wordpress.com/
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Push buttons / Encoder

Post by jhsa »

No problem, I'm glad it works and that you have learnt why it works.. Double win.
Make sure you save the model to the computer using Eepskye. You can also save it to the SD Card

João

Sent from my BLN-L21 using Tapatalk

My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

Post Reply

Return to “Hardware Mods”