Name for the 5pin connector in the module

General mods that are considered worth doing; regardless of the end firmware you use.
Post Reply
JayC
Posts: 21
Joined: Tue Aug 27, 2013 12:03 pm
Country: -

Name for the 5pin connector in the module

Post by JayC » Mon Oct 07, 2013 9:29 am

What's the official name for the 5pin connector in the module? Need to buy a few but can't find them as I don't know what that thing is called in english!!!

Cheers

User avatar
Kilrah
Posts: 9661
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Name for the 5pin connector in the module

Post by Kilrah » Mon Oct 07, 2013 10:27 am

No idea about the name, but I'm pretty sure there's a link to one from Farnell somewhere in this thread:

http://openrcforums.com/forum/viewtopic ... &start=240

EDIT: Here http://uk.farnell.com/molex/38-00-1395/ ... dp/9732349

JayC
Posts: 21
Joined: Tue Aug 27, 2013 12:03 pm
Country: -

Re: Name for the 5pin connector in the module

Post by JayC » Mon Oct 07, 2013 11:22 am

That's great, thanks!

I also found the kind of socket that's in the turnigy module, it's apparently called 'pin strip header'.

User avatar
Kilrah
Posts: 9661
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Name for the 5pin connector in the module

Post by Kilrah » Mon Oct 07, 2013 12:37 pm

"Pin strip header" is generic, i.e there are zillions of different ones (different spacement, size, length, how much below and above the plastic holder etc).

Post Reply

Return to “Electronic Mods”