FrSky DHT DIY telemetry mod with original smartieboard

All mods related to the frsky telemetry series of the firmware
Post Reply
Kiwi
Posts: 18
Joined: Thu Nov 15, 2012 8:33 am
Country: -

FrSky DHT DIY telemetry mod with original smartieboard

Post by Kiwi » Mon Dec 12, 2016 8:13 am

HI i just had a question regarding using the DHT DIY module with the original smartieboard in a Turnigy 9X. It is running ER9X and has the backlight installed.
Where do i connect the telemetry, I dont thave the smartieboard telemetryEZ which is no longer available and was hoping to do it without it?
Do i still connect it up the same as if i didnt have the smartieboard??

Thanks in advance for anyhelp!!

User avatar
jhsa
Posts: 18013
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: FrSky DHT DIY telemetry mod with original smartieboard

Post by jhsa » Mon Dec 12, 2016 11:05 am

Yes, you would still have to do the telemetry mod as explained in the wiki..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

Kiwi
Posts: 18
Joined: Thu Nov 15, 2012 8:33 am
Country: -

Re: FrSky DHT DIY telemetry mod with original smartieboard

Post by Kiwi » Sat Dec 24, 2016 10:06 pm

Thanks!

is this the correct link for the mod?
http://openrcforums.com/wiki/index.php/ ... _telemetry
also found this youtube video
https://www.youtube.com/watch?v=pUdJwiltog0&t=115s
ignoring the parts other than the diy frsky mod, theres part 2 also but seems very detailed and easy to follow. He however does not use the resistors..

I have a few questions regarding thes mods, since we reroute the THR and AIL switches does it make these no longer usable?
and why do some mods use a 220ohm resistor between pins 7 and 8 and the resistors and some dont?

Thanks again!

Post Reply

Return to “FRSky Telemetry Mods”